Lot 54 Listing# 1138296
SP Scientific Genevac miVac Quattro QUC-12060-C00 Centrifugal Vacuum Concentrator with Speed Trap
Location:
Durham, NC, USA
Event Start Date:
10/19/2026
Invoices Will be Sent:
10/27/2026
All invoice payments are due immediately upon receipt.
Equipment must be collected by December 4th.
Equipment Description
SP Scientific Genevac miVac Quattro centrifugal vacuum concentrator, supplied together with its matching miVac Speed Trap refrigerated condenser. The miVac Quattro is a benchtop centrifugal evaporator used to concentrate and dry samples under vacuum and gentle heat, and is suited to a wide range of solvents from volatile organics through to water and some higher boiling point solvents. The Quattro chamber offers roughly double the sample capacity of the miVac Duo and accepts interchangeable rotors for microcentrifuge tubes, vials, larger tubes, microplates and round bottom flasks (rotors are not confirmed in the photographs).
The concentrator carries model number QUC-12060-C00, serial number QUC02220448, date of manufacture February 2022, and is rated 120 V, 60 Hz, 900 VA total, 34 kg per its nameplate. The front panel provides manual and automatic modes, a pre-heat function, method and time display with a rotary select control, and start/stop keys. The rear panel has an IEC power inlet and an auxiliary 400 VA max outlet for a controlled vacuum pump/valve, plus a vacuum port for the trap hose. The lid is marked CAUTION HOT SURFACE, reflecting the heated chamber.
The companion miVac Speed Trap is model MST-12060-C00, serial number MST02221520, also dated February 2022 and rated 120 V, 60 Hz, 550 VA, 25 kg. It is a compact refrigerated condenser charged with 0.0710 kg of R449A refrigerant, with a removable clear collection flask marked MAX held in a stainless bracket with a carry handle, front indicators for cooling/defrost and a defrost switch, and wire-reinforced vacuum hoses for connection to the concentrator.
Per the field user, the concentrator and Speed Trap were used together and are being sold together. Both units are shown loose on a wire shelf with power cords and connecting hoses present; nothing in the photographs or notes documents operational testing, hours or service history.
Specifications:
Standard
Metric
Manufacturer Name
SP Scientific
Year:
2022
2022
Serial Number:
QUC02220448 (speedvac) and MST02221520 (Speed Trap)
QUC02220448 (speedvac) and MST02221520 (Speed Trap)
CE Marked:
YES
YES
Model:
Mini SpeedVac and Speed Trap
Mini SpeedVac and Speed Trap
Voltage:
120
VOLTS
120
VOLTS
Frequency:
60
HERTZ
60
HERTZ
Phase:
1
1
Current:
900
VA
900
VA
Capacity Details:
Centrifugal vacuum concentrator chamber with interchangeable rotors for microcentrifuge tubes, vials, tubes, microplates and round bottom flasks; appr
Centrifugal vacuum concentrator chamber with interchangeable rotors for microcentrifuge tubes, vials, tubes, microplates and round bottom flasks; appr
Products Run:
Removal of water and organic solvents from samples in tubes, vials and microplates; low-volume freeze drying with the SpeedTrap
Removal of water and organic solvents from samples in tubes, vials and microplates; low-volume freeze drying with the SpeedTrap
Sampling Details:
MICROPLATES
MICROPLATES
Heating Cooling Requirements:
Heated concentration chamber with pre-heat function (lid marked CAUTION HOT SURFACE); refrigerated Speed Trap condenser, R449A refrigerant, 0.0710 kg
Heated concentration chamber with pre-heat function (lid marked CAUTION HOT SURFACE); refrigerated Speed Trap condenser, R449A refrigerant, 0.0710 kg
Recommended Packaging Form:
PALLET
PALLET
Dimensions:
Standard
Metric
See all item dimensions
Item #1:
30.00 x 24.00 x 20.00 IN - 110.00 LBS
762.00 x 609.60 x 508.00 mm - 49.90 kg
Item #2:
20.00 x 14.00 x 22.00 IN - 70.00 LBS
508.00 x 355.60 x 558.80 mm - 31.75 kg
Overall:
28 x 22 x 16 in - 160 lbs
711.20 x 558.80 x 406.40 mm - 72.58 kg
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.