Lot 45 Listing# 1046294

Thermo Scientific Cytomat 2 C-LIN Automated CO2 Incubator with Orbitor RS Plate Handler


You must be logged in to participate in auctions

Log in



Location:

Philadelphia, PA, USA

Event Start Date:

10/19/2026

Invoices Will be Sent:

10/27/2026
All invoice payments are due immediately upon receipt.

Equipment must be collected during the week of November 16th - 20th. Any equipment not collected during this time period, will be considered abandoned.
Equipment Description
Thermo Scientific Cytomat 2 C-LIN automated CO2 incubator with an integrated Thermo Scientific Orbitor RS plate handler. The Cytomat 2 C-LIN is a mid-capacity automated incubator built for unattended storage and incubation of microplates in cell culture and screening workflows, with a robotic transfer gate that hands plates off to laboratory automation. The unit is the 120 V version, rated 1N/PE 120 V, 5.8 A, 0.7 kW, 50/60 Hz, IP 20, order code 50124828, built 2016/12/05 per the manufacturer nameplate. The incubator offers heated operation to 50 degrees C with CO2 regulation and humidified atmosphere; the front control panel provides separate temperature and %CO2 displays with set point up/down keys, info/alarm, auto-start and calibration functions, door and auto-start indicators and a mains switch. The interior is a stainless/copper-lined chamber fitted with vertical microplate hotel racks and an internal transfer mechanism, shown open in the photos, and blue CO2/gas supply tubing is connected at the top of the cabinet. The accompanying Thermo Scientific Orbitor RS is a cylindrical rail-mounted plate-handling robot, labeled 25 kg (55 lb), input 24 V DC, 4 A, 100 W, part number F01743, dated 10-2016. It is shown on the bench alongside the incubator together with its linear rail/track and a multi-level plate nest stack with black plate shelves. Equipment was photographed on site in a laboratory being decommissioned; the photos show the system disconnected and staged on a bench with the incubator door open and the plate handler standing beside it. No power-on test, run hours or service history is documented. The listing ships as two separately tagged pieces: the incubator and the Orbitor RS plate handler.

Specifications:
Standard
Metric

Manufacturer Name

Thermo Scientific
 

Year:

2016
2016

Serial Number:

42038660
42038660

CE Marked:

YES
YES

Model:

Cytomat 2 C-LIN
Cytomat 2 C-LIN

Temperature Range:

50 DEG C
50 DEG C

CO2 Control:

YES
YES

Humidity Control:

YES
YES

Voltage:

120 VOLTS
120 VOLTS

Frequency:

50/60 HERTZ
50/60 HERTZ

Phase:

1
1

Current:

5.8 AMPS
5.8 AMPS

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

See all item dimensions

Item #1:

32 x 30.00 x 62.00 IN - 0.00 LBS
32.00 x 30.00 x 62.00 IN - 445.00 LBS

Item #2:

18 x 18.00 x 42.00 IN - 0.00 LBS
18.00 x 18.00 x 42.00 IN - 55.00 LBS

Overall:

32 x 30 x 62 in - 500 lbs
812.80 x 762.00 x 1574.80 mm - 226.80 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.