Lot 66 Listing# 1045618
Thermo Scientific Savant SC210A SpeedVac Concentrator System with RVT5105 Refrigerated Vapor Trap
Location:
Philadelphia, PA, USA
Event Start Date:
10/19/2026
Invoices Will be Sent:
10/27/2026
All invoice payments are due immediately upon receipt.
Equipment must be collected during the week of November 16th - 19th. Any equipment not collected during this time period will be considered abandoned. No exceptions.
Equipment Description
The Thermo Scientific Savant SC210A SpeedVac Concentrator is a high-capacity centrifugal vacuum concentrator used to evaporate solvent and concentrate or dry many samples at once. Vacuum is applied to the sample chamber while the rotor spins, and the centrifugal force keeps samples from bumping or foaming, which makes the design suited to aqueous solutions and low concentrations of non-aggressive organic solvents in applications such as DNA/RNA precipitates, protein hydrolysates, chromatography fractions and sample prep for HPLC or LC/MS. The SC210A offers three selectable heat settings and accepts a range of Savant rotors for microcentrifuge tubes and microplates (no rotor is shown in the photos). The data plate reads MODEL SPEEDVAC CONC.-HI CAP., MODEL # SC210A-115, SERIAL # N27Z-446830-NZ, 115 V, 6 A, 60 Hz, YR 2014, made in the United States, and the chamber lid area is ported for an RC210 radiant cover.
The system includes a Savant RVT5105 Refrigerated Vapor Trap, catalog RVT5105-115, serial 170136511, rated 115 V AC, 1 phase, 60 Hz, 13.0 A. The trap condenses solvent vapor in a removable glass condensation flask before it reaches the vacuum pump; its sealed mechanical refrigeration system cools to approximately -105 C, so no dry ice or acetone is required. POWER ON and READY indicators are on the front panel.
Two rotary vane vacuum pumps are pictured with the system: an Edwards RV8 (code A654-01-906, serial 006650495, 27 kg) fitted with an oil mist filter, and a Thermo Scientific-badged VLP200 pump, also labeled RV8 (code NGA7-02-000, serial 169463702, 27 kg), which carries a tag reading FOR GEL DRYING USE THERMO SCIENTIFIC OIL-FREE GEL PUMP and a green PASSED ELECTRICAL SAFETY TEST sticker.
The equipment came out of a biopharmaceutical facility and is shown staged on a pallet in a warehouse, with power cords coiled on top of the concentrator. No operating or service history was recorded at the time of the visit, and the unit was not tested; condition should be verified by inspection.
Specifications:
Standard
Metric
Manufacturer Name
Thermo Scientific
Year:
2014
2014
Serial Number:
N27Z-446830-NZ
N27Z-446830-NZ
CE Marked:
NO
NO
Model:
Savant SC210A SpeedVac Concentrator with RVT5105 Refrigerated Vapor Trap
Savant SC210A SpeedVac Concentrator with RVT5105 Refrigerated Vapor Trap
Voltage:
115
VOLTS
115
VOLTS
Frequency:
60
HERTZ
60
HERTZ
Phase:
1
1
Current:
6
AMPS
6
AMPS
Capacity Details:
High capacity chamber; accepts Savant rotors for microcentrifuge tubes (up to approximately 200 x 1.5 mL) or 96-well microplates; rotor not included i
High capacity chamber; accepts Savant rotors for microcentrifuge tubes (up to approximately 200 x 1.5 mL) or 96-well microplates; rotor not included i
Capacity Size:
1.06
gal
4
L
Products Run:
Aqueous samples and low concentrations of non-aggressive organic solvents (e.g. DNA/RNA precipitates, protein hydrolysates, chromatography fractions,
Aqueous samples and low concentrations of non-aggressive organic solvents (e.g. DNA/RNA precipitates, protein hydrolysates, chromatography fractions,
Heating Cooling Requirements:
Three selectable heat settings on the concentrator; vapor trap uses a sealed CFC-free refrigeration system cooling to approximately -105 C, no dry ice
Three selectable heat settings on the concentrator; vapor trap uses a sealed CFC-free refrigeration system cooling to approximately -105 C, no dry ice
Recommended Packaging Form:
PALLET
PALLET
Dimensions:
Standard
Metric
See all item dimensions
Item #1:
26.00 x 20.00 x 16.00 IN - 110.00 LBS
660.40 x 508.00 x 406.40 mm - 49.90 kg
Item #2:
24.00 x 23.00 x 19.00 IN - 150.00 LBS
609.60 x 584.20 x 482.60 mm - 68.04 kg
Item #3:
20.00 x 10.00 x 14.00 IN - 70.00 LBS
508.00 x 254.00 x 355.60 mm - 31.75 kg
Item #4:
20.00 x 10.00 x 14.00 IN - 70.00 LBS
508.00 x 254.00 x 355.60 mm - 31.75 kg
Overall:
26 x 20 x 16 in - 250 lbs
660.40 x 508.00 x 406.40 mm - 113.40 kg
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.