Autobag PaceSetter PS 125 Table Top Bagger

Autobag PaceSetter PS 125 table top bagger, a compact hand-load automatic bagging system used to open, fill and seal pre-opened bags-on-a-roll. The machine is built on the Automated Packaging Systems PS 125 platform (Part No. 597000A1), with a keypad/display control panel on the left side for job setup, an Autothread bag feed, a hinged top sealer assembly with guard, and a drop-down front bag roll cradle with adjustable roll support bars and a scale strip for film alignment. Per the manufacturer's published data, the PS 125 runs at speeds up to 25 bags per minute and handles bag sizes from 2 in to 10.5 in wide by 4 in to 17 in long in 1.0 to 4.0 mil film. The nameplate rates the unit at 95/132 VAC 60 Hz, 5 A at 115 VAC, or 180/264 VAC 50 Hz, 2.7 A at 230 VAC, single phase, with a short-circuit rating of 6.3 A and a machine weight of 82 lbs (37.2 kg). The data plate carries a CE mark and a RoHS label. This unit is serial number PS08 10 639, manufactured August 2010, and came out of a medical device facility, where it carried asset tag 104995. Photos show the machine sitting loose on a pallet with its power cord coiled in the bag roll cradle and no film roll loaded. Condition was not evaluated and the machine was not powered up or run during the site visit; it is offered as-is, where-is.