Baxter H938 099R Repeater Pharmacy Pump

Baxter H938 099R Repeater Pharmacy Pump, a benchtop peristaltic fluid transfer and filling pump used in hospital and compounding pharmacy admixture work. It is used to transfer a preset volume of solution repeatedly from a source container into syringes, IV bags, vials or other containers using a disposable Repeater pump transfer set loaded behind the hinged clear door, so the fluid path stays within the single-use tubing set. The membrane keypad and LCD on the front show Volume (mL), Units Filled and Seconds Interval, with numeric entry and dedicated Volume/Source Volume, Interval, Clear Units Filled/Preset Quantity, Drawback/Memory Store, Reverse/Memory Recall, Adjust and Start/Stop keys. Three selectable pump speeds (Low, Med, High) are provided, and the published capability of the Repeater platform is a dispense range from roughly 0.2 mL up to 9,999 mL per cycle with flow rates up to about 13.5 mL per second through a 16G needle. An interlock label on the housing notes that the door must be closed for the pump to operate. The unit is powered from 120 volts, 60 Hz, 200 VA per the Baxter nameplate, which also carries part number H938 099R, serial number PL0006386, a 2018-07-25 build date and a cUL US listing as reconditioned laboratory equipment. Rear panel has the IEC inlet, rocker power switch and user-replaceable fuse holder. The unit carries a Central Admixture Pharmacy Services asset label (ID# 116715) and an orange 'Calibrated at Time of Use' tag dated AUG 24 2022. A handwritten note on the paper towel over the pump door in photo 3 reads '116715 Not Working', so the pump is being offered as non-functional / for parts or repair and should be evaluated accordingly. No tubing sets, needles or other accessories are shown in the photos.