Baxter Repeater Pharmacy Pump

Baxter Repeater Pharmacy Pump, part number H938 099R, a benchtop peristaltic fluid transfer pump used in pharmacy compounding and admixture operations for repetitive filling, reconstitution and transfer of fluids into syringes, bags and vials. The unit draws fluid through a disposable transfer set routed around the rotor behind a hinged clear safety door, which must be closed for the pump to run. The membrane keypad on the front offers numeric volume entry, Low/Med/High speed selection, Drawback (memory store), Adjust, Interval (function), Clear Units Filled (preset quantity), Reverse (memory recall) and Start/Stop, with an LCD showing volume in mL, units filled and the interval in seconds. Baxter rates the Repeater for deliveries from 0.2 mL (+/-10%) up to 9,999 mL at flow rates up to about 13.5 mL per second. The nameplate on the rear of this unit reads 120 volts, 60 Hz, 200 VA, serial number PL0006394, with a manufacture date of 2018-07-25; the rear panel carries the IEC power inlet, rocker power switch and a user-replaceable fuse holder. The machine comes from a Central Admixture Pharmacy Services facility and still carries that site's asset label (ID# 116991) along with a rear calibration sticker dated Oct 10, 2022. A red "OUT OF SERVICE - Calibrate Before Use" tag is affixed to the top of the unit, so the pump should be calibrated before being placed back into service. Operation was not verified and no power cord, foot control or transfer sets are shown in the photos of this listing.