Portland Kettle Works 5 BBL Brewhouse with 15 BBL Hit Liquor Tank and 3 Head Keg Washer

• Brand: Portland Kettle Works (Portland, Oregon, USA)
• 5 BBL Steam Powered Brewhouse (semi-auto, 2 vessel)
• 15 BBL Hot Liquor Tank
• 3-Head Keg Washer
• 35 Gallon Hop-Back (Pressurized) Grant

5 BBL “HOPMASTER” Steam Powered Brewhouse
• 5 BBL system, including brewhouse, hot liquor tank, and premium accessories
• 2-vessel system (plus HLT – see details below)
• Made in the USA
• Located in Canada
• Capable of double-batch with 15 BBL HLT

Brewing Kettle (BK)
• Capacity: 7.4 BBL / 8.7 Hectoliter / 229 Gallon
• Internal steam calandria with external steam jacket

Mash Tun (MT)
• Capacity: 8.4 BBL / 9.9 Hectoliter / 259 Gallon
• Equipped with a Valveless External Calandria (VEC)
• Two-stage glycol heat exchanger
• Hopmaster 5.0 Heat Exchanger
• 2-Stage Plate and Frame Heat Exchanger

Catwalk
• 26? high non-skid brew deck
• Sturdy 304 stainless steel tube frame

Hopmaster Admiralty Upgrade Package
• Upgraded glass manway lids (hatches) instead of stainless steel on both mash tun and boil kettle
• Laser Etched Graduation strip added beside sight tube on the boil kettle
• 2x pumps with VFDs
• Integrated Brew House with 2 pumps running on variable frequency drives (VFD) that allow the brewer to precisely adjust the pump output from zero to 17 GPM (65 LPM) output
• Swing link manifold features a 304 stainless steel laser-etched brewer’s manifold for diverting wort through the brewing process.
• Includes 100% sanitary rigid piping
• Site glass swing arm – allows visual inspection of wort moving through every stage of the brewing process
• Sample port swing arm- allows on-the-fly sampling of wort moving through every stage of the brewing process

Electrical Control Panel
• Electrical and control panel built to 508A UL Standard
• Aids in inspector approval as a recognized standard of engineering and manufacturing
• 4-20mA output temperature controls on VEC for modulating steam valve (valve provided by others).
• Automate the control of your mash by setting a digital set point.
• 4-20mA output temperature controls on knockout for modulating water valve (valve provided by others).
• Automate your knockout temperature by setting a digital set point.
• 110v output on boil kettle controls for on/off steam valve.
• This allows the brewer to maintain lower set points and shut off steam when hitting the emergency shut-off valve.

Hot Side Cellar Pack: includes butterfly valves, 100’ brewers’ hose, all tri-clamps, Band-it
• Tool and Band-it Bands
• Mash Paddle: appropriately sized paddle for mixing, stirring and scraping
• Grain-Out Hoe: appropriately sized, custom-made 304 stainless steel handle and base with UHMW blade
• Manifold Mixing valve assembly with control of strike water temperature and flow for a mash hydrator
• Flowmeter Stainless steel, digital flowmeter displaying temperatures and volumes transferred
• Hot-side aeration assembly—A wort aeration assembly including a thermometer, thermowell, site glass, and aeration stone for wort aeration from the plate chiller to fermentation vessels.
• Grist Hydrator—The Hydrator collar attached between the Grist Case and Mash Tun assures a thorough wetting of the grist on its way into the Mash Tun.

Hot Liquor Tank (HLT) – 15 BBL; Steam Powered
• Includes pump with VFD
• The large capacity HLT design allows for zero downtime when double batching, clean-in-place (CIP), and keg washing
• Capacity: 15.0 BBL / 17.6 hectoliter / 465 Gallon
• Fully insulated stand-alone HLT vessel heated by internal calandria that continually agitates the HLT, resulting in a consistent liquor temperature throughout the vessel
• Auto-fill level sensor and controls are included to allow you to top off your tank without over-filling

=====================================================================
NEW (Never Used) Portland Kettle Works Hop-Back Pressurized Grant
• Brand: Portland Kettle Works
• Made in the USA
• Located in Canada
• Ready to ship – no lead time for manufacture

Features
• Stainless steel
• Capacity: 35 Gallon
• Pressurized manway, rated up to 14.7 psi
• Includes drain, racking arm, false bottom, and wheels
• Multiple uses, including hop-back grant, reservoir for CIP systems keg washers, etc.
• NOTE:
• The tank can be upgraded to include a heating element
• Additional components required, sold separately

=====================================================================
NEW (Never Used) Portland Kettle Works 3-Head Keg Washer
• Brand: Portland Kettle Works
• Made in the USA
• Located in Canada
• Ready to ship – no lead time for manufacture

Features
• 3-head machine
• Semi-auto with HMI screen
• Washer, sanitizer, and CO2 purge
• Easy-to-use manifold with onboard pump and peristaltic pump
• Requires the 35 G reservoir (grant tank) for chemical additions (included in this package)