NO. de listado 1030756

Analizador Chandler Engineering 6100


Haga una pregunta

Divisa aceptada por el vendedor:

$50,000.00 USD

Realizar Oferta

Ubicación:  AB, Canadá

Nivel de Remoción:  

Por qué recomendamos una inspección

*Todas las ofertas se deben ingresar en la divisa aceptada del vendedor

¿No encuentra lo que está buscando? Lo encontramos por usted.





Descripción del equipo
Chandler Engineering 6100 Formation Response Tester

Includes Two Quizix Pumps, Haskel CO2 Booster Pump and Quizix Q6000 CO2 pump

A Critical Tool for Reservoir Analysis
The Model 6100 Formation Response Tester (FRT) is designed to accurately measure the permeability changes of a formation sample when exposed to a variety of test fluids. This highly flexible, easy to use system is capable of simulating nearly any well completion and stimulation schedule on a core sample. The unit is also capable of operating as a dynamic fluid loss tester with the optional Slurry Cart.

Designed for Flexibility and Reliability
The unique design of the Model 6100 allows fluids to be injected through a prepared core sample to simulate the flow of treating fluids or formation fluids. Core flow can be directed through several paths: Injection and Production (forward, reverse), Top and Bottom flush (across-face) and Leak Off and Lift Off. Up to nine separate fluids can be controlled in any sequence through any flow path (6 directly connected to the pump and 3 accumulators). The system is designed to handle acids and other corrosive fluids at temperatures up to 350ºF / 177ºC. Reliability is designed into the Model 6100 to ensure many years of service. A custom valve manifold contains all necessary flow paths. This significantly reduces the number of fittings, the maze of tubing, the fluid dead volume, and most importantly the number of potential leaks. Durable, air-operated valves 316SS or C-276 wetted parts can be quickly and easily replaced if needed.

Operational Simplicity
The Model 6100 is designed to be very user friendly both mechanically and in its software interface. The core holder pivots to ease insertion of a core sample or inspection of the holder. Once the core is loaded into the core holder, a confining pressure is applied to the Hassler Sleeve to seal the core. The technician then programs or selects a flow schedule and a desired temperature before clicking on the “run” button to begin the test. Multiple pressure ports along the core allow monitoring the change in permeability as fluids invade deeper into the core as well as the determination of skin factors which may influence the testing results.

The software for the Model 6100 also performs the data acquisition. All channels are recorded with time and can either be outputted directly or exported in spreadsheet format. The recorded data includes the measured and calculated values selected by the user. Upon test completion, an automated cleaning cycle can be run to prepare the system for the next test.

Especificaciones:
Estándar
Métrico
Fabricante
Chandler Engineering
 

Número de serie:
142
142

Modelo:
6100
6100

Voltaje:
220 VOLTS
220 VOLTS

Frecuencia:
50/60 HERTZ
50/60 HERTZ

Fase:
1
1

Corriente:
30 AMPS
30 AMPS

Tipo:
CHEMISTRY
CHEMISTRY

Empaque recomendado:
TARIMA PERSONALIZADA
TARIMA PERSONALIZADA


Dimensiones:
Estándar
Métrico

General:
67 x 34 x 64 IN - 600 LBS
1701.80 x 863.60 x 1625.60 mm - 272.16 kg

Aviso Legal

Este listado se vende "en el estado que está y en donde se encuentre". Le sugerimos que se comunique con un representante de ventas de EquipNet para programar una inspección. Este artículo se encuentra ubicado en

AB

Este Listado está sujeto a costos por carga y remoción.


La descripción escrita que se ofrece para este artículo es EXACTAMENTE lo que usted recibirá si decide comprar este listado. Los artículos que no estén en la descripción pero que aparezcan en las representaciones visuales del listado, no estarán incluidos en la venta. Las fotos y videos se ofrecen únicamente como referencia y para dar una idea general de las condiciones del artículo.

Por favor tome en cuenta que el peso y las dimensiones de los equipos que EquipNet proporciona en los listados solo es un aproximado y que puede variar del peso y tamaño real. Los etimados de los Vendedores por lo general no son precisos especialmente cuando se compara el equipo instalado y el mismo equipo prerarado para su envio. Por tal motivo. por favor no se confíe de la exactitud de la información en los listados de EquipNet cuando realice cotizaciones de envío y/o requerimientos del tamaño del usuario.

No es transferible ningúna licencia relaacionada a este equipo.