Bomba de Infusión Baxter

The Baxter Repeater Pharmacy Pump (part no. H938 099) is a benchtop peristaltic fluid transfer pump used in pharmacy compounding and admixture operations. It automates repetitive fluid transfers - reconstituting drugs, filling syringes, vials and bags, and preparing IV admixtures - using a disposable Repeater pump tube set so the fluid path stays contained in the single-use set.

The pump is operated from a sealed membrane keypad with a numeric entry pad and a three-window LCD showing dispense volume in mL, units filled, and interval in seconds. Dedicated keys cover Volume/Source Volume, Low/Med/High speed selection, Drawback/Memory Store, Adjust, Interval/Function, Clear Units Filled/Preset Quantity, Reverse/Memory Recall, and Start/Stop. Published Baxter specifications for this model list dispense volumes from 0.2 mL (plus or minus 10%) up to 9,999 mL and flow rates up to about 13.5 mL per second with a 16G needle, with multiple speed combinations and a memory for commonly used programs. The data plate on the rear of the housing reads 120 volts, 60 Hz, 200 VA, UL listed laboratory equipment, part no. H938 099, serial no. PL0013756, with a manufacture date of 2020-07-21.

The unit is shown in a compounding pharmacy setting with the hinged clear tube-set cover in place and a cord bundle photographed alongside it. The housing carries facility asset labels from Central Admixture Pharmacy Services, including an orange "Calibrated at Time of Use" sticker and a red "OUT OF SERVICE - Calibrate Before Use" tag marked ID# 117096, dated Nov 13, 2024. No tube sets, foot switch or pump stand are visible in the photos. Buyers should assume calibration is required before use; operating condition was not verified.