NO. de listado 1138614
Línea de Empaque Various
Comprar artículos de segunda mano Various Línea de Empaque en venta
Divisa aceptada por el vendedor:
$105,000.00 USD
Solicitar más información Realizar OfertaUbicación: PQ, Canadá
Nivel de Remoción:
Por qué recomendamos una inspección
*Todas las ofertas se deben ingresar en la divisa aceptada del vendedor
¿No encuentra lo que está buscando? Lo encontramos por usted.
Descripción del equipo
Complete Vertical Bagging and Cartoning Line
Line consists of:
Feeding: Loading hopper, bucket elevator and one vibratory transfer feeder.
Weighing and inspection: WeighPack combination weigher and Loma gravity-feed metal detector.
Bagging: White Eagle vertical bagger, discharge conveyor and bag levelling conveyor.
Cartoning: HC-3200 horizontal cartoner with Nordson hot melt system.
End of line: Carton conveyors, coding, case sealer, gravity rollers and Loma AS checkweigher.
Recorded average rates: 90 g: 42.8 units/min. 114 g: 40.2 units/min. Each figure is the arithmetic mean of the average actual rates of the product references in that format in the production export.
Documented package formats: 114 g folding carton: 3.5 × 1 × 6 in the packaging list, with no unit stated. The 90 g folding-carton dimensions are not documented.
Footprint: 383.12 × 589.24 inches, Approximately 9.73 × 14.97 m (width × length).
Equipment Details:
Loading hopper - Stainless-steel feed station, inventory ID 640-111-CUVE. Its capacity and dimensions are not recorded.
Bucket elevator - Via Pack conveyor, 2018. The inventory lists 90 buckets. It lifts product toward the weighing section.
Vibratory transfer feeder - Eriez model 56C, identified by its nameplate and inventory, 2025. One unit is included in the line presented.
Combination weigher - WeighPack 10H 2.5 L, serial number 4838, 2017. It prepares portions for bagging.
Gravity-feed metal detector - Loma IQ4, 2017, on the product flow before bag formation.
Vertical bagger - White Eagle WEMC, serial number 114, 2016. It forms bags from film, receives weighed portions and seals the bags.
Transfer conveyor - Dorner 2200 series, 2019. The inventory describes a 5.45 ft inclined section and a 10 ft horizontal section.
Bag levelling conveyor - Via Pack conveyor, 2018. It levels the bags after bagging and before transfer.
Documented films - Documented roll widths: 185 mm for the 90 g format and 205 mm for the 114 g format. Roll width is not the finished bag dimension.
Horizontal cartoner - Consolidated Technologies HC-3200, serial number 11154, 2018. It opens flat folding cartons and closes their flaps.
Hot melt glue system - Nordson ProBlue 7 with two applicator guns, integrated into the cartoning station for flap closure.
90° conveyor - Easy Conveyors EMBS, 2018. It changes carton travel direction at the exit. The drawing specifies a 90° bend, 340 mm width and 750 mm radius.
Accumulation conveyor - Easy Conveyors EMBS, inventory length 144 in. It receives cartons at the exit.
Carton conveyor - Conveyor identified as 640-170-CONV, 2015, for moving boxes.
Case sealer - Tufflex TF122-SB/3 2000. It closes shipping cases after packing.
Foxjet coding system - Foxjet printer model 2464025 with controller 2465006D4, installed at the exit conveyor.
Printing conveyor - Motorized section approximately 4 ft long according to the inventory, 2018.
Gravity conveyors - Two sections, 5 ft and 6 ft, for the exit toward palletizing.
Final checkweigher - Loma AS Series checkweigher shown on a conveyor. The manual describes weight checking and several reject options depending on configuration; the exact model of this unit still needs to be identified.
Line consists of:
Feeding: Loading hopper, bucket elevator and one vibratory transfer feeder.
Weighing and inspection: WeighPack combination weigher and Loma gravity-feed metal detector.
Bagging: White Eagle vertical bagger, discharge conveyor and bag levelling conveyor.
Cartoning: HC-3200 horizontal cartoner with Nordson hot melt system.
End of line: Carton conveyors, coding, case sealer, gravity rollers and Loma AS checkweigher.
Recorded average rates: 90 g: 42.8 units/min. 114 g: 40.2 units/min. Each figure is the arithmetic mean of the average actual rates of the product references in that format in the production export.
Documented package formats: 114 g folding carton: 3.5 × 1 × 6 in the packaging list, with no unit stated. The 90 g folding-carton dimensions are not documented.
Footprint: 383.12 × 589.24 inches, Approximately 9.73 × 14.97 m (width × length).
Equipment Details:
Loading hopper - Stainless-steel feed station, inventory ID 640-111-CUVE. Its capacity and dimensions are not recorded.
Bucket elevator - Via Pack conveyor, 2018. The inventory lists 90 buckets. It lifts product toward the weighing section.
Vibratory transfer feeder - Eriez model 56C, identified by its nameplate and inventory, 2025. One unit is included in the line presented.
Combination weigher - WeighPack 10H 2.5 L, serial number 4838, 2017. It prepares portions for bagging.
Gravity-feed metal detector - Loma IQ4, 2017, on the product flow before bag formation.
Vertical bagger - White Eagle WEMC, serial number 114, 2016. It forms bags from film, receives weighed portions and seals the bags.
Transfer conveyor - Dorner 2200 series, 2019. The inventory describes a 5.45 ft inclined section and a 10 ft horizontal section.
Bag levelling conveyor - Via Pack conveyor, 2018. It levels the bags after bagging and before transfer.
Documented films - Documented roll widths: 185 mm for the 90 g format and 205 mm for the 114 g format. Roll width is not the finished bag dimension.
Horizontal cartoner - Consolidated Technologies HC-3200, serial number 11154, 2018. It opens flat folding cartons and closes their flaps.
Hot melt glue system - Nordson ProBlue 7 with two applicator guns, integrated into the cartoning station for flap closure.
90° conveyor - Easy Conveyors EMBS, 2018. It changes carton travel direction at the exit. The drawing specifies a 90° bend, 340 mm width and 750 mm radius.
Accumulation conveyor - Easy Conveyors EMBS, inventory length 144 in. It receives cartons at the exit.
Carton conveyor - Conveyor identified as 640-170-CONV, 2015, for moving boxes.
Case sealer - Tufflex TF122-SB/3 2000. It closes shipping cases after packing.
Foxjet coding system - Foxjet printer model 2464025 with controller 2465006D4, installed at the exit conveyor.
Printing conveyor - Motorized section approximately 4 ft long according to the inventory, 2018.
Gravity conveyors - Two sections, 5 ft and 6 ft, for the exit toward palletizing.
Final checkweigher - Loma AS Series checkweigher shown on a conveyor. The manual describes weight checking and several reject options depending on configuration; the exact model of this unit still needs to be identified.
Especificaciones:
Estándar
Métrico
Fabricante
Various
Año:
2015 - 2019
2015 - 2019
Empaque recomendado:
TARIMA PERSONALIZADA
TARIMA PERSONALIZADA
Dimensiones:
Estándar
Métrico
General:
1 x 1 x 1 IN - 1 LBS
25.40 x 25.40 x 25.40 mm - 0.45 kg
Documentos del activo
Aviso Legal:
Este listado se vende "en el estado que está y en donde se encuentre". Le sugerimos que se comunique con un representante de ventas de EquipNet para programar una inspección. Este artículo se encuentra ubicado en
PQ
Este Listado está sujeto a costos por carga y remoción.
La descripción escrita que se ofrece para este artículo es EXACTAMENTE lo que usted recibirá si decide comprar este listado. Los artículos que no estén en la descripción pero que aparezcan en las representaciones visuales del listado, no estarán incluidos en la venta. Las fotos y videos se ofrecen únicamente como referencia y para dar una idea general de las condiciones del artículo. Por favor tome en cuenta que el peso y las dimensiones de los equipos que EquipNet proporciona en los listados solo es un aproximado y que puede variar del peso y tamaño real. Los etimados de los Vendedores por lo general no son precisos especialmente cuando se compara el equipo instalado y el mismo equipo prerarado para su envio. Por tal motivo. por favor no se confíe de la exactitud de la información en los listados de EquipNet cuando realice cotizaciones de envío y/o requerimientos del tamaño del usuario. No es transferible ningúna licencia relaacionada a este equipo.
Condiciones del derecho de devolución:
Servicios relacionados:
EquipNet ofrece soporte para todo el ciclo de vida del equipo, desde la compra hasta la entrega, el almacenamiento y la preparación, para que pueda seguir adelante con confianza.
- Logística global
- Soluciones de almacenamiento
- Servicios de ciclo de vida de los equipos
- Asesoramiento y apoyo en materia de cumplimiento normativo
- Programas de seguridad en el lugar de trabajo
- Documentación de seguridad
- Auditorías de la FDA y preparación para inspecciones
- Validación de calidad y procesos