Equipos buscados - Ver equipos por tipo, industria y ubicación.

External Keg Washer capable of cleaning up to 400kph.

I am searching for Nutsche filter 1000 l working volume.

FLEXICON FP50 FILLING MACHINE

SMI Cluster Packaging Machine - MTB or MP Model

Glass bottle & can crushing machine - individual or duel capabilities.

Small - Medium size complete UHT filling line for non carbonated drink.

Büchi Mini Spray Dryer B-290 (230 V / 50–60 Hz)

IMA Blister line TR135

Client is looking for a tea bagging machine which can produce nylon pyramids with single envelop by 50 pcs/min, and a tea blending line with capacity for 25 kg automatic bag filling

Large scale brewer looking for two x candle filters - capable of filtering 400hl/H.

Client needs a cap feeder ideally a model CSW 54-MF-10 or with similar characteristics/dimensions. Equipment must be capable of handling 202 CDL & 200 CDL can ends/caps. Production speed has to be 60,000 cph.

Client is in need to increase their perfume production. Will entertain any options available from PKB or similar OEM's that are set up to fill & cap perfume bottles. Please connect if you have any surplus relevant to this request.

Customer is looking for a complete tub / jar filling line that fall within the specifications below. Product is a moisturizing cream/lotion for skin care:

• Speed: 100 cps/min
• Filling: 300ml to 600ml
• Bulk: 10 to 80 poise
• Bulk Direct feed + Tanks

40 kbph RGB line running 750ml bottles in a 12 bottle plastic crate.
Due to the bottle size the filler has preferably a pitch of 103/104mm to allow for the installation of bottle bursting plates.
We are also interested in any machines that would be fit to integrate in such a line

OEM LIST Paddle Dryer
Unit Value Parameter 1.4404
316L material of construction
Ton 11.6 weight empty
m3 2.75 net volume of draying chamber
m3 0.38 shaft (paddle)
volume (steam) m3 0.796
shell volume (steam) 0C 100 operation temp barg -1 drying chamber operation pressure barg 4 shell & paddle pressure Technically, the important issues: material of construction = SS316L, net drying volume ˜ 3 m3, drying chamber minimum pressure -1Barg, shell max pressure 4 Barg.

other models are of no use.

Seidenader V90-Plus Semi-automatic Inspection Machine - K
Must be compatible for Europe electrical connections

Looking for Can filler / Seamer for 20k cph. 250 ml, 330 ml, 500 ml cans size

Krones RGB Filler (ONLY) required. Not earlier than 2013. Min capacity 28k BPH for 0.5 litre bottles.

Heidolph Laborota 20L rotary evaporator (in any condition)

rotary lid feeder for canning line

Hidex AMG AutoGamm Required

Require a single pass drier for drying snack foods

Specifications needed
1200mm wide
20m in length
Gas fired
120deg c to 170 deg c

we need an MCA96 (Multiple Channel Arm™ 96) - *not* MCA384.

Specifications: Hammer Mill
Infeed size: varies, up to 180 mm
Final size: approximately 20 mm, screen defines
Input humidity: approximately 60 – 70 %
Capacity: 6000 kg/h
Impurities: Sea salt from the sea water, small rest of minerals, traces of sand and muzzles
Feeding: Even and continuous feeding to the mill must be ensured
Possible screen sizes: 20, 22, 25 mm
Configuration of hammers: 12 hammer rows, 7 hammers per row
Hammer dimension: 175mm x 60mm x 10-12mm
Rotor width: 900 mm
Rotor diameter: 750 mm
Inlet dimension: 250mm x 1000mm
E-motor with direct drive, power: 90kW, with discharge screw ca 1,5 kW

currently looking for gas boilers at 15t/h steam with 24 bar - end destination : Europe

5 PET lines required. Used for still and sparkling water as follows: 1. Still Water. 45k BPH with Blower, Filler and Labeller. 2. Sparkling Water. 24k BPH with Blower & Filler. 3. Sparkling Water. 32k BPH with Blower & Filler. 4. Sparkling Water. 24k BPH with Blower & Filler & Labeller. 5. Sparkling Water. 55k BPH with Blower & Filler & Labeller. Ideally Combi Sidel otherwise Tribloc or other, but forget about Monobloc. Open to other OEMS. NOT OLDER THAN !5YRS OLD