Labconco Purifier Logic+ Class II Type A2 Biological Safety Cabinet

Labconco Purifier Logic+ Class II, Type A2 biological safety cabinet, Catalog No. 302511101, Serial No. 191083588 A. The cabinet provides personnel, product and environmental protection for contamination-sensitive work such as cell culture, microbiology and pharmaceutical laboratory procedures, recirculating approximately 70 percent of the airflow through a HEPA-filtered downflow and exhausting the balance through a HEPA-filtered exhaust back into the room or to a canopy connection. The unit has a stainless steel work surface and interior, a fully closing tempered safety glass sash, a curved stainless steel inlet grille, LED work-area lighting, and an interior-mounted line-of-sight color LCD with Labconco's MyLogic operating system that displays airflow status, filter life and alarm conditions. The touch control pad is mounted on the right-hand side post (photo 1) and the LCD on the right interior wall appears lit in photo 2. A service fixture valve is plumbed through the right interior wall, and a UV lamp and side electrical receptacles are part of this configuration. The cabinet is mounted on its matching Labconco adjustable base stand; the listing records overall dimensions of 78 in long x 32 in wide x 88 in high and an estimated shipping weight of 800 lbs. A Gast diaphragm vacuum pump/compressor with pressure gauge and regulator was sitting on the work surface at the time of the site visit (photo 3); it is shown for reference and inclusion should be confirmed with the seller. Certification, HEPA filter condition and airflow performance have not been verified by EquipNet - the unit should be re-certified after relocation, as is standard for any biological safety cabinet. Ships as two pieces: the cabinet and its base stand.