Labconco Purifier Logic+ Class II Type A2 Biological Safety Cabinet

Labconco Purifier Logic+ Class II Type A2 biological safety cabinet, catalog no. 302511101, serial no. 191083590 A. This is a 6-foot wide Class II Type A2 cabinet that provides personnel, product and environmental protection by drawing room air through a front intake grille and supplying HEPA-filtered, vertical laminar airflow to the work zone, with 70% of the air recirculated and 30% exhausted through a second HEPA filter. It is intended for microbiological, cell culture and general biopharmaceutical work with biosafety level 1-3 agents. The cabinet has a powder-coated steel exterior and a leak-tight stainless steel interior with a coved, removable work surface and perforated front and rear grilles. Control is by the interior-mounted, line-of-sight color LCD touchscreen with Labconco's MyLogic operating system, which displays airflow status, filter life and alarm conditions; the screen was photographed lit and reading BLOWER STARTING. A stainless steel service fixture valve with a serrated hose barb is mounted on the right interior side wall, with a side-wall pass-through port on the left, and the sash is a sliding glass window. The cabinet sits on a matching tubular base stand. A Gast DOA-P704-AA diaphragm vacuum/pressure pump (115V, 4.2 A, 60 Hz, per its motor nameplate) with combination pressure and vacuum gauges is photographed with the cabinet and is included as a separate piece. A third-party certification label and a Labconco parts and service label are affixed to the cabinet front; the unit was photographed in place in an operating laboratory and powered up. Overall dimensions as recorded for this listing are approximately 76 in. wide x 33 in. deep x 90 in. high with an estimated shipping weight of 800 lbs. No information on hours, service history or additional accessories beyond what the photographs show is available.