Lot 698 Listing# 1141883

Lot of 7 Chromatography Columns


You must be logged in to participate in auctions

Log in



Location:

Cerritos, CA, USA

Event Start Date:

12/4/2026

Invoices Will be Sent:

12/11/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$25.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment Description
Lot of 7 Chromatography Columns

This lot has seven process-scale liquid chromatography columns from Pharmacia Biotech / GE Healthcare and Merck. Six are glass-tube columns with stainless steel end assemblies and adjustable flow adaptors, and one is a stainless steel column.

The lot in the photos is made up of
  • 2 x GE Healthcare BPG 200/500 glass process columns, code no. 18-1103-11: 16 L max column volume, 6 bar g design pressure, 4-40 °C operating temperature, 24 kg maximum filling mass and 34 kg tare mass, CE and Ex II 3G marked
  • 3 x Pharmacia / Amersham Pharmacia Biotech BPG series glass process columns in different sizes. One label reads 4 bar pressure permitted, 60 °C. Another reads 26.4 L volume, 3.0 bar pressure permitted, 60 °C, made in Sweden.
  • 1 x Merck Superformance 500-100 glass column: 500 mm nominal length x 100 mm inside diameter, 78.5 cm² cross-section area, 8 bar max operating pressure, 0 to 60 °C operating temperature
  • 1 x Pharmacia Biotech stainless steel column marked 10 x 30 cm (vessel by Tensor AB): 20 bar g design pressure at 130 °C, 10 bar g operating and hydraulic pressure, 0.003 m³ volume
  • Most of the columns stand on stainless steel mobile stands with locking casters. One BPG 200/500 sits on a wooden dolly, one column is on a stainless steel frame stand, and the Merck column and the stainless column are on fixed-leg stands.
  • The top adaptors are adjusted by threaded rods with T-handles or a handwheel.
  • The years of manufacture on the labels run from 1991 to 2010.
  • In the photos, the outer surface of the Merck Superformance tube shows visible crazing.

  • Specifications:
    Standard
    Metric

    Manufacturer Name

    Various
     

    Material of Construction:

    GLASS
    GLASS

    Column Type:

    PACKED
    PACKED

    Recommended Packaging Form:

    PALLET
    PALLET


    Dimensions:
    Standard
    Metric

    See all item dimensions

    Item #1:

    30.00 x 30.00 x 70.00 IN - 110.00 LBS
    762.00 x 762.00 x 1778.00 mm - 49.90 kg

    Item #2:

    20.00 x 20.00 x 66.00 IN - 35.00 LBS
    508.00 x 508.00 x 1676.40 mm - 15.88 kg

    Item #3:

    26.00 x 26.00 x 52.00 IN - 90.00 LBS
    660.40 x 660.40 x 1320.80 mm - 40.82 kg

    Item #4:

    20.00 x 20.00 x 44.00 IN - 85.00 LBS
    508.00 x 508.00 x 1117.60 mm - 38.56 kg

    Item #5:

    22.00 x 22.00 x 58.00 IN - 80.00 LBS
    558.80 x 558.80 x 1473.20 mm - 36.29 kg

    Item #6:

    32.00 x 32.00 x 72.00 IN - 115.00 LBS
    812.80 x 812.80 x 1828.80 mm - 52.16 kg

    Item #7:

    24.00 x 24.00 x 36.00 IN - 35.00 LBS
    609.60 x 609.60 x 914.40 mm - 15.88 kg

    Overall:

    120 x 36 x 72 IN - 550 LBS
    3048.00 x 914.40 x 1828.80 mm - 249.48 kg


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.