Lot of Teardrop Style Pallet Racking with Wire Decking

Lot of teardrop style pallet racking with wire decking, removed from a medical device distribution warehouse. The racking is standard roll-formed teardrop (keyhole punched) selective rack, consisting of welded upright frames with horizontal and diagonal bracing, step beams with safety clips, and galvanized welded wire mesh deck panels on the beam levels. Based on the dimensions recorded for this lot, the upright frames measure approximately 240 in (20 ft) tall by 42 in deep and the beams are approximately 96 in (8 ft) long, giving standard pallet bays. Photos show multi-level bays, typically four to five beam levels per bay, set up in long back-to-back and single rows throughout the facility. Uprights are floor-anchored with bolted base plates and finished in a dark gray paint; the wire decking appears bright and in good order. Several bays in the lot are fitted with welded wire mesh security panels and gated enclosures forming caged storage areas, including a quarantine cage, as seen in the photos. Row end frames, footplates and bracing appear straight and intact in the images, with no visible bent beams or impact damage, although the lot has been in service and was photographed in place. The racking is currently standing and anchored to the concrete floor and will require disassembly by the buyer or a rigging contractor before removal. Component counts (number of uprights, beams, wire decks and pallet positions) were not tallied at the time of the visit and should be confirmed with the seller before purchase.