Lot 281 Listing# 1045596
Lot of VWR Digital and Analog Heatblock Dry Bath Lot with Labnet AccuBlock D1200
Location:
Philadelphia, PA, USA
Event Start Date:
10/19/2026
Invoices Will be Sent:
10/27/2026
All invoice payments are due immediately upon receipt.
Equipment Description
Dry baths of this type are used for incubation and activation of cultures, enzyme reactions, immunoassays, melting and boiling point work and general sample heating. The digital VWR units have a temperature display with plate/probe and actual/set-point indicators, up/down temperature keys, an integrated timer with its own display and on/off keys, and a power key with standby indicator; the published rating for the 12621-088 two-block unit is 120 V, 50/60 Hz, 1 phase, 210 W. The analog units are controlled by low and high temperature adjust knobs with a low/off/high rocker switch and a heat indicator lamp, and the single-block analog unit is rated 120 V, 110 W. The Labnet AccuBlock D1200 is rated 115 VAC, 60 Hz, 2 A and has a digital temperature display, up/down and start/stop keys, heating and set temp indicators and a rear serial port.
Several of the units are shown with modular anodized aluminum tube blocks installed - blue two-piece blocks for micro-centrifuge and larger tubes on the VWR digital units and stainless/aluminum blocks on the Labnet and other units - and a temperature probe is fitted to the AccuBlock in the photos. Blocks appear in the photos but block sizes and the number of blocks supplied should be confirmed by the buyer.
Condition is as photographed: bench-top units in a working laboratory, with an asset/calibration barcode label on one analog unit and hand-written "do not turn off" notes taped to two of the units, indicating they were in active service at the time of the visit. The AccuBlock display and heating indicator appear illuminated in the photos. All units are free-standing benchtop instruments with standard 120 V line cords.
Powers On Explanations
Labnet AccuBlock D1200 display shows lit digits with the red Heating indicator on in photo 4; taped notes read
Specifications:
Manufacturer Name
Serial Number:
Model:
Number of Blocks:
Voltage:
Frequency:
Phase:
Current:
Recommended Packaging Form:
Dimensions:
See all item dimensions
Item #1:
Item #2:
Item #3:
Item #4:
Item #5:
Overall:
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.