Manitowoc IDT0620A-161 Indigo NXT Ice Machine with SFA192 Ice and Water Dispenser

Manitowoc IDT0620A-161 Indigo NXT modular ice machine head mounted on a Manitowoc SFA192-161 ice and water dispenser. The air-cooled head produces full dice cube ice at up to approximately 560 lb per 24 hours and sits on a floor-standing dispenser cabinet that stores roughly 120 lb of ice and dispenses both ice and chilled water through a push-pad chute with a removable drip tray and grate. The unit runs on 115 V, 60 Hz, single phase power (ice maker nameplate: 12.2 min. circuit amps, 20 A max fuse/HACR breaker, R410A charge of 19 oz; dispenser nameplate: 115 V, 60 Hz, 1.6 A motor FLA, 15 A max circuit). The machine carries the Indigo NXT easyTouch color control display on the ice maker head, which shows status, service and diagnostic information; in photo 3 the display is lit and reading BIN FULL, so the unit powers up and was in service. Construction is stainless steel exterior panels with gray trim, NSF component listed and UL/cUL listed, with adjustable leg levelers on the dispenser base. The unit was photographed installed in a break/service area of a medical device facility, connected to building water through a wall-mounted Pentair Everpure water filter with a braided supply line and draining to a floor drain; those connections will need to be disconnected before removal. The ice maker head is serial number 1121038593 (manufactured 2023) and the dispenser base carries serial number 1121060042. No accessories beyond the drip tray/grate shown are included, and no service history is available.