Mettler Toledo InMotion Pro Autosampler

Mettler Toledo InMotion Pro Autosampler, a bench-top robotic sample changer used to automate pH, ion and titration measurements on Mettler Toledo meters and titrators. The unit consists of a motorized turntable base with a vertical tower and a movable sensor/stirrer head that lowers the electrodes into each sample position and indexes the rack from one beaker or tube to the next. The Pro base takes the full InMotion Pro rack family on a 42 cm (approximately 16.5 in) diameter turntable, covering sample loads from 23 x 180 mL beakers up to 182 x 25 mL tubes depending on which rack is fitted. The rear type plate rates the instrument at 100-240 VAC, 50/60 Hz, 35 VA single phase, and the unit carries CE, CSA C/US and FCC markings. Rear connections visible in the photos include the IEC power inlet, two round accessory ports and a data/communication port for connection to the host instrument; a power button is on the front panel. The photos show the base fitted with a dark blue open-position rack (large beaker style) seated on the white turntable, plus a second complete rack assembly supplied alongside it: a high-density small-tube cover and a matching white carrier, together with a bagged metal clip/spring ring insert. The instrument is loose on a shop cart and is identified by serial number C125011309. No power-up, functional test or calibration information was recorded at the time of inspection, and no electrodes, stirrers, beakers or host meter are shown with the unit. The buyer should plan on verifying operation and supplying the connected meter or titrator.