Lot 83 Listing# 1141950

Repligen CTech SoloVPE System with Agilent Cary 60 UV-Vis Spectrophotometer


You must be logged in to participate in auctions

Log in



Location:

Seekonk, MA, USA

Event Start Date:

12/9/2026

Invoices Will be Sent:

12/21/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$25.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment Description
Repligen CTech SoloVPE System with Agilent Cary 60 UV-Vis Spectrophotometer

Repligen CTech SoloVPE variable pathlength extension system paired with an Agilent Cary 60 UV-Vis spectrophotometer, used for slope-spectroscopy concentration measurement of samples such as proteins without dilution.

The system in the photos is made up of
  • Repligen CTech SoloVPE variable pathlength sampling unit, serial CTS2301161, Made in USA, with an Accessory Port and a Detector Port on the rear panel
  • Agilent Cary 60 UV-Vis spectrophotometer, product no. G6860A, manufactured 2023-11
  • Repligen Dual Use Fiber Optic Coupler (IN-CARY60-FOC-CTI), installed in the Cary 60 sample compartment, coupler serial CTC03329
  • CTech SoloVPE Delivery Fiber FA-CTI01-PC26
    Accessories and documentation in the photos
  • CTech SoloVPE System Accessory + Installation Kit box (ACC-VPE-SOLOKIT / SYS-IQOQ-KIT)
  • SoloVPE Fibrette 50-packs (OF0002-P50)
  • VPE 1-mm Standard Solution Blue Kit (CHEM013-KIT)
  • SoloVPE accessory and consumable storage case with assorted parts
  • CTech software case labeled CTS2301161
  • Agilent Cary WinUV V5 software/documents pack (G6861-60010)
  • Cary 60 User's Guide, box content list and documentation envelope
  • Dual Use Fiber Optic Coupler user manual
  • Agilent publishes a 190-1100 nm wavelength range for the Cary 60, which uses a xenon flash lamp.
  • The Cary 60 rear label reads 12 V DC, 3.2 A and carries CE, UKCA and CSA marks. It has Accy, USB and AUX ports.
  • In the photos, the Cary 60 power button and a green indicator on the SoloVPE sample stage are lit.

  • Powers On Explanations

    Cary 60 power button ring appears lit green in photos 1-2; green indicator lit on SoloVPE sample stage in photo 9

    Specifications:
    Standard
    Metric

    Manufacturer Name

    Repligen
     

    Year:

    2023
    2023

    Model:

    CTech SoloVPE
    CTech SoloVPE

    Serial Number:

    CTS2301161
    CTS2301161

    CE Marked:

    YES
    YES

    Voltage:

    12 VOLTS
    12 VOLTS

    Current:

    3.2 AMPS
    3.2 AMPS

    Recommended Packaging Form:

    PALLET
    PALLET


    Dimensions:
    Standard
    Metric

    See all item dimensions

    Item #1:

    23.00 x 19.00 x 8.00 IN - 40.00 LBS
    584.20 x 482.60 x 203.20 mm - 18.14 kg

    Item #2:

    14.00 x 14.00 x 18.00 IN - 25.00 LBS
    355.60 x 355.60 x 457.20 mm - 11.34 kg

    Item #3:

    20.00 x 12.00 x 4.00 IN - 7.00 LBS
    508.00 x 304.80 x 101.60 mm - 3.18 kg

    Overall:

    57 x 19 x 18 IN - 72 LBS
    1447.80 x 482.60 x 457.20 mm - 32.66 kg


    Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

    This equipment is subject to a removal and loading charge.

    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non transferable.

    EquipNet, Inc. Auction Terms

    • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
    • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
    • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
    • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
    • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
    • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
    • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
    • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
    • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
    • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
    • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

    To read full terms and conditions, click here.