Lot 320 Listing# 1138651

Shimadzu LCMS-8060 Triple Quadrupole Liquid Chromatograph Mass Spectrometer with Nexera X2 UHPLC

You must be logged in to participate in auctions

Download High Res Photos View Lot Catalog

Location:

Durham, NC, USA

Event Start Date:

10/19/2026

Invoices Will be Sent:

10/27/2026
All invoice payments are due immediately upon receipt.

NOTICE:

The seller of this equipment requires the buyer to accept sales agreement

Equipment Description

Shimadzu LCMS-8060 triple quadrupole liquid chromatograph mass spectrometer, coupled to a Shimadzu Nexera X2 UHPLC front end. The LCMS-8060 is a benchtop tandem (MS/MS) quadrupole system used for high-sensitivity quantitative LC/MS/MS work in R&D, bioanalytical and method-development laboratories, supporting MRM, product/precursor ion and neutral loss scanning with heated ESI-type ionization. The nameplate on the instrument reads MODEL LCMS-8060, CAT. NO. 225-27810-58, SERIAL NO. O11105300061AE, 230V~, 2 KVA, 50/60 Hz, Made in Japan. The mass spectrometer is shown with its ion source interface housing open, the CID gas pressure gauge (0.50-0.60 MPa) on the right side, and the rear gas manifold plumbed for nebulizing, drying, heating and CID gas. The front status panel carries POWER, STATUS, HEATER, GAS and HV indicators, and the unit is asset-tagged LCMS04. A Leybold/Sogevac SV65 BI FC rotary vane roughing pump sits on a tray beneath the bench and is connected to the instrument by a flexible vacuum hose. The Nexera X2 UHPLC front end photographed with the system includes a CBM-20A communications bus module, DGU-20A5R degassing unit, Nexera X2 LC-30AD solvent delivery pumps, a Nexera X2 SIL-30AC autosampler, a CTO-20AC column oven with FCV valve units installed, and a Shimadzu solvent reservoir tray. A Dell Precision T1700 workstation with Acer monitor and keyboard is pictured with the system as the data station. No field notes on condition, run hours or service history were provided, and the system was not observed powered on; it is offered as removed from an R&D laboratory with the components shown in the photographs.

Specifications:

Standard

Metric

Manufacturer Name

Shimadzu

Serial Number:

O11105300061AE

CE Marked:

YES

Model:

LCMS-8060

Type of Mass Spec:

TRIPLE STAGE QUAD

Voltage:

230 VOLTS

Frequency:

50/60 HERTZ

Phase:

Current:

2 KVA

Recommended Packaging Form:

PALLET

Dimensions:

Standard

Metric

See all item dimensions

Item #1:

40 x 28.00 x 24.00 IN - 0.01 LBS

40.00 x 28.00 x 24.00 IN - 550.00 LBS

Item #2:

24 x 22.00 x 48.00 IN - 0.00 LBS

24.00 x 22.00 x 48.00 IN - 200.00 LBS

Item #3:

32 x 16.00 x 16.00 IN - 0.00 LBS

32.00 x 16.00 x 16.00 IN - 120.00 LBS

Item #4:

24 x 12.00 x 20.00 IN - 0.00 LBS

24.00 x 12.00 x 20.00 IN - 35.00 LBS

Item #5:

24 x 10.00 x 18.00 IN - 0.00 LBS

24.00 x 10.00 x 18.00 IN - 20.00 LBS

Overall:

40 x 28 x 24 in - 550 lbs

1016.00 x 711.20 x 609.60 mm - 249.48 kg

Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

To read full terms and conditions, click here.

Sales Agreement

FOR VALUABLE CONSIDERATION, the receipt in hand and sufficiency of which is hereby acknowledged, Csliq Corporation ("Seller"), a Delaware corporation hereby sells and transfers to, ("BUYER"), all of its right, title and interest in and to the following described Articles:

Seller hereby represents and warrants to that it is the absolute owner of the above Articles, that said Articles are free and clear of all liens, charges, security interests, and encumbrances, and that Seller has full right, power and authority to sell said Articles and to make this Bill of Sale.

The employees or representatives of the SELLER are not authorized to make any statements as to the quality and condition of the ARTICLES being offered for sale, other than the written statements made herein. Buyer acknowledges that any such statement made will not be binding on the SELLER.

Except for warranty of title, the above personal property is sold AS IS, WHERE IS and WITH ALL FAULTS. Seller makes no other express or implied representations of any kind with regard to the Articles. Seller confirms all articles are visually clean. Certain articles have been in contact with OHC Category 5 compounds. These articles are clearly identified. All other articles may have been in contact with OHC Category 4 or lower compounds. Buyer accepts all liability in regards to the suitability of use for which said articles are purchased. THE PARTIES AGREE THAT THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED FROM THIS TRANSACTION AND SHALL NOT APPLY TO THE ARTICLES SOLD. Seller shall not be responsible for damages of any kind (including, but not limited to, direct, incidental or consequential damages) to anyone for any deficiencies or failure of any Articles for any reason. BUYER assumes all risk of loss after title has passed.

Title to ARTICLES shall transfer from the SELLER FOB shipping point or at the time the BUYER commences removal activities from SELLERS premises. In both cases, BUYER shall be responsible for the maintenance, operation and disposal of the ARTICLES in accordance with applicable law thereafter.

BUYER indemnifies, defends and holds Seller harmless against any and all liability and damage, including, but not limited to, reasonable legal fees arising out of any claim for personal injury, sickness, and death to any person and for any property damage caused by the Articles or by hazardous chemicals or other hazardous materials on or in the Articles, whether or not due to the negligence of Seller, during the commencement of the dismantling or other work by BUYER and thereafter following delivery by Seller.

BUYER shall take any and all precautions necessary to protect Sellers facility, including, without limitation, areas surrounding the REMOVAL AREA, roadways and sidewalks. The BUYER shall be responsible for the repair of any and all damage to property resulting from the REMOVAL. Any and all debris created by the BUYER in performance of the REMOVAL, shall be removed daily, leaving the area in good housekeeping condition. In the event any Seller permits are required in the course of the REMOVAL, BUYER shall initiate and coordinate with EQUIPNET, and Buyer will execute, subject to Seller approval thereof, any permits required to safety perform the work.

BUYER acknowledges that all descriptions of the EQUIPMENT are a good faith attempt to accurately reflect the specifications of the EQUIPMENT being offered for sale. The BUYER is responsible for verifying the truth and accuracy of all EQUIPMENT listing information. All items are sold as is, where is, and with all faults. Seller makes no warranty, expressed or implied as to the nature, quality, value or condition of any piece of EQUIPMENT. Seller expressly disclaims any warranty of merchantability, fitness for a particular purpose or non-infringement. EQUIPMENT is being sold without software, if any is applicable. In the event that software is included in the EQUIPMENT sale, notwithstanding the disclaimer set forth above, Seller makes no representation or warranties regarding the BUYERS right to use such software, as to the performance of the software, its non-infringement or otherwise. BUYER is to assume no piece of EQUIPMENT carries a manufacturer?s warranty at the time this item is offered for sale.

Collection of all applicable taxes shall be in accordance with federal, state and local tax laws. If the BUYER does not remove the purchased piece of EQUIPMENT during the stated removal period, Seller, in conjunction with EQUIPNETs Buyer Terms, may deem the item to have been abandoned by the BUYER and thereupon the BUYER shall have no further rights with respect to the piece of EQUIPMENT.

BUYER agrees to comply with all export control and related laws. Certain pieces of EQUIPMENT may constitute Restricted Technology. Under federal law, such items may not be shipped outside of the United States. Seller makes no representation or warranty concerning, and has conducted no investigation to ascertain which items, if any, constitute Restricted Technology. Seller reserves the right to cancel any sale at any time in the event it determined, in its sole discretion, hat the sale does or may violate applicable export control or similar laws.

It is the BUYERS sole responsibility to meet all government safety and environmental standards in removing, shipping and using any purchased EQUIPMENT. Certain items of EQUIPMENT may contain hazardous substances as that term is defined under federal, state or local environmental laws and regulations. EQUIPMENT may also include "asbestos containing materials" as defined by USEPA, OSHA or other federal, state or location laws or regulations. While the Seller shall be liable for its failure to perform hereunder if said performance is made impracticable due to any occurrence beyond its reasonable control, including act of God, fires, floods, wars, sabotage, accidents, labor disputes or shortages, governmental laws, ordinances, rules and regulations, whether valid or invalid, and any other similar or different occurrence. If, due to any occurrence, Seller is unable to supply SURPLUS ITEMS specified in this Agreement or any portion thereof and appropriate adjustment to the Sales Price paid by Buyer will be made. In no event shall Seller be obligated to purchase or manufacture/generate SURPLUS ITEMS or other ITEMS in order to enable it to deliver SURPLUS ITEMS to Buyer. The Buyers only and total recourse would be for a refund of paid money.

This Agreement shall be governed by and shall be construed according to the laws of the State of Massachusetts as if executed and to be performed wholly within the State of Massachusetts. All actions, legal or other, instituted by BUYER under this Agreement must be filed in a federal or state court located in Boston, Massachusetts. In the event that any provision of this Agreement shall be found by a court of competent jurisdiction to be invalid or unenforceable as written as a matter of law, then only those provisions will be deemed invalid and the remaining part of this Agreement will remain valid and enforceable.

The validity, interpretation and performance of this Agreement with respect to SURPLUS ITEMS delivered or to be delivered hereunder shall be governed by the laws of the Commonwealth of Massachusetts. This Agreement contains all of the representations and agreements of the parties hereto pertaining to the subject matter hereof, and there are no oral understandings, representations or warranties affecting it. This Agreement shall be binding upon and endure to the benefit of the respective successors and assigns of each of the parties hereto, but any assignment hereof by Buyer without the prior written consent of Seller shall be void. No modifications of this Agreement or waiver of the terms or conditions hereof shall be binding upon Buyer or Seller unless approved in writing by an authorized representative, or shall be effected by the acknowledgment or acceptance of purchase order forms containing other or different terms or conditions whether or not signed by an authorized representative of Buyer or Seller. Neither course of performance nor course of dealing nor usage of trade shall be used to interpret, construe, qualify, explain or supplement any of the terms of this Agreement. Some equipment may be contaminated with Active Pharmaceutical Ingredient (API- and all of the equipment was cleaned according to internal procedures and includes visual cleaning validation only. This equipment will not be used by the Buyer for any other different activity from pharmaceutical drugs manufacturing. Active Pharmaceutical ingredient (API) ? Any chemical or biochemical substance having pharmacological activity that may be used in the treatment or prevention of an illness or injury.

BUYER:

SELLER: