Lot 110 Listing# 1046305

Thermo Scientific Neslab ThermoFlex 1400 Recirculating Chiller


You must be logged in to participate in auctions

Log in



Location:

Philadelphia, PA, USA

Event Start Date:

10/19/2026

Invoices Will be Sent:

10/27/2026
All invoice payments are due immediately upon receipt.

Handling Fee:

$0.00 USD

This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.

Equipment must be collected during the week of November 16th - 19th. Any equipment not collected during this time period will be considered abandoned. No exceptions.
Equipment Description
Thermo Scientific Neslab ThermoFlex 1400 recirculating chiller, an air-cooled benchtop/floor-standing closed-loop chiller used to provide temperature-controlled process fluid to lasers, analytical instruments, reactors and other laboratory or production equipment. The unit is identified by the front badge reading NESLAB ThermoFlex1400 and by the manufacturer data label on the rear housing. The rear nameplate reads 115V 60Hz / 100V 50Hz, 14.1 amp, single phase, and shows refrigerant R-134A, 19 oz charge, high side 348 PSIG / low side 200 PSIG, with CE and CSA markings. Serial number 0127512201150316, BOM# 111101110000017. Published data for this model lists cooling capacity of up to 1400 watts (4781 BTU/hr) at 20 degrees C on 60 Hz and a 7.2 liter (1.9 gallon) reservoir, with a typical setpoint range of +5 to +40 degrees C. Features visible in the photos include the top-mounted digital display and keypad with power, mode, enter and up/down arrow keys, a front fluid level sight gauge marked MIN LEVEL and MAX LEVEL, a molded fill port on the top deck, and a removable front grille over the air-cooled condenser. A power cord is shown with the unit, and the condenser grille and fins are visibly dusty. The display is not lit in the photos, so operation was not demonstrated.

Specifications:
Standard
Metric

Manufacturer Name

Thermo Scientific
 

Serial Number:

0127512201150316
0127512201150316

CE Marked:

YES
YES

Model:

Thermoflex 1400
Thermoflex 1400

Temperature Range:

+5°C to +40°C DEG C
+5°C to +40°C DEG C

Voltage:

115 VOLTS
115 VOLTS

Frequency:

50/60 HERTZ
50/60 HERTZ

Phase:

1
1

Current:

14.1 AMPS
14.1 AMPS

Tonnage:

0.4
0.4

Recommended Packaging Form:

PALLET
PALLET


Dimensions:
Standard
Metric

Overall:

24 x 14 x 24 in - 120 lbs
609.60 x 355.60 x 609.60 mm - 54.43 kg


Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.

This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.

This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non transferable.

EquipNet, Inc. Auction Terms

  • All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
  • All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
  • All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
  • The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable. 
  • Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
  • Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
  • Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
  • Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
  • Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
  • Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
  • All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.

To read full terms and conditions, click here.