Unused Elkay Weldbilt WNSF-8124 Stainless Steel Single Bowl Sink

Elkay Weldbilt WNSF-8124 stainless steel single bowl sink. The Weldbilt line is a commercial/institutional grade sink built of heavy 14-gauge type 304 stainless steel with welded, 1/4" radius coved corner construction, welds ground smooth for cleanability, and exposed surfaces polished to a satin finish. The sink carries NSF certification; the NSF mark is visible on the backsplash in photo 1. This unit is a single compartment (one basin) sink with a full-length rear backsplash drilled with two faucet holes, inward sloping channel rims on the remaining sides, a compartment pitched to a center drain opening, and a bowl depth of approximately 14 inches. The factory identification label reading WELDBILT / Elkay Manufacturing Company, Broadview, Illinois, WNSF-8124 with the R / L / LR drainboard options listed is still affixed to the backsplash; no drainboard option is checked and none is present on this unit. No faucet, drain fitting or legs are shown in the photos. The sink is pictured inside its original corrugated carton with the factory packing inserts in place and the factory label still attached, and shows no signs of installation or service. Overall dimensions recorded for the listing are 24 in long x 21 in wide x 14 in high with an estimated shipping weight of 45 lbs. Sinks of this type are commonly used in food service, laboratory, pharmaceutical and medical device facility wash-up and utility applications; this unit comes from a medical device facility.