Lot 15 Listing# 1143042
Unused Waters Acquity H-Class UPLC with QDa Detector
Location:
Allentown, PA, USA
Event Start Date:
11/10/2026
Invoices Will be Sent:
11/16/2026
All invoice payments are due immediately upon receipt.
Handling Fee:
$60.00 USD
This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and shipping are additional and can be provided once your equipment invoice has been paid.
Equipment Description
The ACQUITY QDa Detector is a mass detector designed as a synergistic element of a chromatographic separations system.
Confirm compound identity with qualitative mass spectral data, complementing quantitative optical data. Quantify compounds
with no UV response or at levels not accessible by optical detection.
Compact for minimized lab space requirements. Integrated flow path for reduced dispersion. Adjustment-free atmospheric
pressure ionisation (API) electrospray (ES) interface for reliability. Compatible with HPLC, UPLC, SFC and UPC2 flow rates of
50 ul/min – 2 ml/min. Disposable sample orifice for minimized maintenance and maximized repeatability. Positive and
negative ion switching capability for enhanced compound coverage. Tool-free maintenance.
Dual off-axis ion guides for elimination of neutral noise with increased sensitivity and robustness. Automated mass calibration
and resolution verification for consistent data quality. Automatically-optimized single ion recording (SIR) and full scan (FS)
analysis in m/z range 30-1250 for enhanced data acquisition. Orthogonal, in-vacuum Dynolite photomultiplier detector for
stability, elimination of neutral noise and longevity.
Clean, differentially pumped, automated vacuum system comprising air-cooled split flow turbomolecular drag pump (TMP)
and rotary vane vacuum backing pump. Fail-safe operation for unattended analysis. Autosensing 100-240 V ac ((50/60 Hz).
Performance option features extended linear dynamic range and lowered limit of detection.
This system specific kit contains the start-up kit and probes needed to start-up ACQUITY UPLC H-Class System Configuration
#2 in a dual stack (see the ACQUITY QDa Detector with H-Class System Configuration Guide at the end of this document).
The kit contains the following components:
205001272 Kit, H-Class – QDa System Accessories, Qty 1
Product# Description
176003370 ACQUITY H-Class with QDa, Kit #4 - Continued
205000726 CH-A Swing-out Kit, Qty 1
410004908 Probe, 250mm x 100µm, Qty 2
725000473 Power Supply, Uninterruptable 5.2KV
(This unit is modified from the standard to allow an ov
Pallet 2
Specifications:
Manufacturer Name
Year:
Model:
Type of Detector for HPLC:
Voltage:
Frequency:
Phase:
Recommended Packaging Form:
Dimensions:
See all item dimensions
Item #1:
Item #2:
Overall:
Certain sellers requires that we assess state sales tax where applicable. Sales tax can only be waived if a valid sales tax exemption certificate is provided.
This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection.
This equipment is subject to a removal and loading charge.
The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.
Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.
Any license associated with this equipment is non transferable.
EquipNet, Inc. Auction Terms
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Auctioneer has ownership or financial relationships with companies that may be participating in the auction to purchase and take ownership of an item. Any such bidding activity will be conducted transparently and in full compliance with all applicable laws, regulations, and recognized industry standards. No bidding will be done to influence prices and only for the purpose of taking ownership.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
To read full terms and conditions, click here.