Listing# 913502

Workhorse Canning WHC41-V3 Can Filling Line with Depalletizer

Seller's Acceptable Currency:

$75,000.00 USD

Make An Offer

Location:  PQ, Canada

Level of Removal:  Still Installed

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

Equipment Description
Workhorse Canning WHC41-V3 Can Filling Line with Depalletizer

Filling Stations
Cans are indexed into a row of 8 cans.
The first 4 cans are pre-purged with CO2
The Second 4 cans are filled with product.
Each can is individually shut off as its filling level reaches the required filling level.
The filled cans are then released to the Lid Placement station

Post Fill CO2 Tunnel
Filled cans pass through a CO2 tunnel prior to lid placement for under lid gassing Lid Separator & Placement
Bulk lids are loaded into a lid separator located immediately before the seamer.
Just prior to being indexed into the seamer, a lid automatically drops onto the can
Under lid gassing is achieved via the CO2 tunnel immediately prior.

Mechanical Seaming Station
Filled cans with lids are positioned in place under a centre seaming chuck by the Can Transfer System.
A lower lift mechanism lifts the can so that the can/lid are held in place against the centre seaming chuck at a set pressure (as determined by Can manufacturer’s seaming specifications)
The lower lift mechanism rotates when driven by the centre seaming chuck.
The system utilizes dual seam outer rollers to perform the initial roll forming process and then a secondary sealing process.
The outer rolls are mechanically driven into the centre chuck via a dual cam system which allows for exact control of the feedrate, pressures, and contact time.
Seam tolerances are easily adjust via a series of set screws which allow for seam adjustment to within +/- 0.001”.
Once the seaming rolls are set up and locked into place, the seaming cycle is then exactly repeated each seaming cycle.
After the seaming process has completed, the can lowers and a new can is indexed into place for the next seaming cycle.

Can Outfeed
Once the cans have been filled and seamed, an outfeed conveyor transfers the cans to an outfeed collection table for manual packing.

Control System
PLC Control System with Touch Screen Interface.
Houses Pneumatic Solenoids all electrical controls.
Nema 4X Enclosure.
120 VAC / 60Hz / 1 Phase Input

Manufacturer Name
Workhorse Canning



Capacity Speed:
24 CPM
24 CPM





30 x 5 x 9 FT - 8000 LBS
914.40 x 152.40 x 274.32 cm - 3628.80 kg


This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in


This equipment is subject to a removal and loading charge.

The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

Any license associated with this equipment is non-transferable.

Customers who viewed this item also viewed this