Agitador Infors HT Multitron (Type I80002)

Infors HT Multitron incubator shakers (Type I80002), supplied as a triple-stacked system of three independently controlled shaker units mounted on a common low base. Each unit is a temperature-controlled orbital shaking incubator used in microbiology, cell culture and fermentation work for growing cultures in flasks and other vessels, with its own door, viewing window, keypad and display so the three chambers can be run at different setpoints at the same time. Per the Multitron platform, the shakers offer an orbital shaking range of approximately 20 to 400 rpm (upper unit of a triple stack typically limited to about 350 rpm) with a 25 mm throw, and microprocessor control of temperature and speed. The nameplates on this stack read TYPE: I80002, YEAR: 2020, with serial numbers E2491119FX2, E2501119FX2 and E2511119FX2, each rated 115 VAC, 15 A, 60 Hz single phase. Photos show the units in good external cosmetic condition with the Infors HT white and orange cabinets, tubular door handles and side control keypads. Biohazard and "Caution Biohazard - Authorized Personnel Only" labels are applied to each unit, and a "Functions" tag is attached to the upper and lower units. A handwritten note on the middle unit reads "humidity error, moved flasks to other inc." and that unit also carries a red "Broken / Remove" tag, so the middle shaker should be assumed to need service. No shaking platforms, clamps or flasks are shown in the photos. The stack was removed from a biopharmaceutical facility. Overall footprint as recorded is 30 in L x 31 in W x 72 in H with an estimated shipping weight of 1200 lbs.