Merck Spectrophotometer
Looking for a Merck Spectroquant Nova 60 or Nova 60A Photometer
Ocasionalmente, a EquipNet tem um cliente que está procurando por um equipamento muito específico que não listamos em nosso extenso MarketPlace. Quando isso acontece, usamos todos os nossos recursos para pesquisar alto e baixo para atender às necessidades de nossos clientes.
Abaixo está a lista atual dos equipamentos atuais desejados, se você tem uma peça nessa lista ou está procurando seu próprio equipamento desejado, entre em contato com um representante de vendas da EquipNet. [email protected]
Looking for a Merck Spectroquant Nova 60 or Nova 60A Photometer
Looking for Fedegari FOB5 with 456L vessel
Filtec Level Sensing System with Reject Station - Must be compatible with 100ml bottles
Adelphi Masterfil equipment
potato sizer that can handle 50,000 lb/hr. Needs to have 3 or 4 size categories – less than 35mm, between 35-45mm, 45-55mm, and over 55mm. The two middle segments can be combined, if needed. A lift-roll sizer is preferred, but a open-web belt sizer would work, as well.
Agilent Technologies 1260 infinity II with DAD detector and quaternary pump.
Must have DAD detector and quaternary pump
We are looking for Powder Packing Machine with following requirements. the product to be packed – HC powders ( detergent powders); speed- 80-100 upm; model- Bosh/ Hassia/Shubham; cut off year of manufacture- 2016; Packing range- 500g to 2 kg
A. Marmite filling machine.
B. Marmite Capping machine
C. Bottle washers.
D. Ironized air bottle cleaner.
E. A auger filler for pre made Savory powder filling in bulk packs including sealing.
F. Auger filler for 7.5g to 40 g - sachets in alu foil for Savory powders
Canning line 40 to 50k cph on 500ml - beer
Canning line 72 to 90k cph on 350ml – beer
RGB line 50k bph with 750ml bottle (filler must have pitch of 103/104 mm) – 12 bottle plastic crate
Still water bottling line, min 24,000bph and not too old (2010+)
Waters
UPLC - Acquity H Class
MultiRad225
Used range of cocoa beans with cocoa butter manufactured by Nagema between 1984 and 1986 with a capacity of 750 to 1000 kg/hour depending on the beans. Equipment includes: - Bucket lifts. - Fortschritt cleaning machine for cocoa beans. - Detergent. - 304 stainless steel continuous roaster, steam heated up to 1200 kg/hour. - Wind type 88 or 90. - Bulcket lifts and silo/tanks for dry products. - Beater mill for grinding roasted cocoa beans up to 1500 kg/hour. - 292C spindle mill for grinding cocoa mass. - Tanks for cocoa mass. - Cocoa press 1450/2 with 12 pots, including hydraulic pump, capacity up to 1000 kg/hour cocoa liquor depending on residual fat content. - Cocoa cake breaker.
Canning line volume of 0.5 l, a line with a capacity of 20,000 aluminium cans per hour. For beer/beermix.
4 total VF-4SS CNC machines
Specifications of poultry processing lines we are looking for. Essentially the processing equipment’s should include all line items without any exceptions for uninterrupted processing of 2000BPH expandable 4000 plus BPH with steel construction to support in future without any hurdles and hence same should be factored into the Layout drawing.
Receiving:
• Receiving conveyor, preferably rollers with crate weighing station integrated and easily interfaceable with crate washer.
• Crate washer – should have 3 stage washing facility.
• Shackle line – of sufficient length to carry out each line activity with sufficient for Stunning time, Bleeding time, Scalding time, Defeathering and so on as per industry standards.
• Hock cutter and hock unloaders by end of the receiving section enable to offload feet and process in dirty area and dispose bad quality feet along with head and feathers.
Evisceration:
• With all EV tools viz, vent drill, scissor, spoon, lung gun and so on.
• SS platform with safety grill to perform the process activities.
• Gizzard peeler
• Giblet chilling tank.
• Crop puller and in/out washer machines.
Chilling:
• Screw chiller – two stages for pre wash (3m) and chilling (6m) of 2.1m dia.
• Layout to support installation of ice machine above stage two screw chiller.
• PHE water to be connected to stage one chilling.
• Consider the length of chiller to match line speed birds and to achieve targeted carcass temperature.
• Drip drum suitable for the line speed.
Sorting/Grading/Packing:
• To support B- Grade birds’ separation if possible
• Sorting and grading for 8 grades in built with bird counter.
• Drop bins with stations for 10 sizes including unsized birds.
• Integration to generate reports with sizes and weight
• Tables and packing stations
Portioning:
• Overhead conveyor that Supports 3000 carcasses per hour
• Wing cutter
• Breast deboner.
• Leg processor.
• Thigh deboner.
• Wings and leg cutting.
• Integrated to conveyor for trimming the breast fillet and thigh fillet.
Searching for a 1m wide Chocolate Enrober and Cooling Tunnel to match. No older than 10 years.
Looking for a Sollas overwrapper; must be model M80 or M100
Looking for a Phenom XL G2 Scanning Electron Microscope
Looking for a Laudenberg Sachet Filling Machine
Formic Acid Plant
Krones Nitro Hot Fill Pet Filling Line
Eastey EB50 Bundler
Looking for a 10lt mixer which has heating, cooling, vacuum, agitation, homogenisation.
Thermo Scientific TruScan RM Analyzer x2
Looking for a vacuum distillation tower with a capacity of 8000 to 10000 barrels per day (crude oil). The objective is to process the atmospheric residue in this vacuum column.
The minimum would be 5,000 gallons (19,000 Liters). I’d need it to be externally jacketed with a large higher HP agitation auger or the horizontal style with the ribbon blending style of mixer. Being rated for a vacuum is a plus since I’ll be pulling vacuum on it, but having it stamped for that is not a necessity.
Dupont Cyrel 1000D Six Drawer Dryer equipment
looking for 700 square foot freeze dryer
Cytiva Cadence VI system
Looking for a PET filler + capper for ketchup. The bottle is like the typical Heinz 400ml. The filler must have 30 pistons at least. Preferred European manufacturers
30 ton bleach/Sodium hypochlorite storage tank required asap. Preferably UK location.
Millrock EPIC model (this is roughly twice the capacity of the Virtis)
Raw specs (Virtis size)
Shelf area minimum 18.6 square feet
Shelf pull down +20 C to -40 in 112 minutes, lowest shelf temp - 60c
Condenser pull down +20 to -45 in 47 minutes, lowest condenser temp -85c
Vacuum 100 millliTorr in 30 minutes
Condenser area 5.2 square feet minimum, volume 35 liters
No stoppering desired
Condenser 24 hour ice formation rate 20 liter
Round tea bag machine - 60 mm diameter round tea bag machine, with output in stacks of 10 bags each or 50 bags in round tins - Miflex ASKO-20 or similar make.
We are in need to purchase a ROVALVE item as below.
Valve, Knife Gate, ROVALVE Model S20-06, 6IN, Lugged Style, ANSI 150# RF Flanged Ends, FTF 2-1/4IN, With CF8M S.S Body, ASTM 4950 GBLB Stem & Nut, AFPL Packing, C/W 5-1/4"OD x 10" Long Cylinder Actuator, Suitable For Use With Trip Tank.. Manufacturer: TYCOFLOW. Mfr Part #: S20-06-CF8M.
need a vacuum chuck with model number 0010-56222, single zone at 450 degrees, brand AMAT.
Softgelatine manufacturing machine required
Tortilla Chip Line 500 kg/hr and above. Must be in great working condition
Potato Chip Lines from 1000 kg/per hour capacity and above. Must be in great working condition.
4-5 years old maximum
Looking for a glass returnable bottle line.
The requirements we have requested are below:
- 30.000bph RGB line for filling glass bottles in crates (1Lt bottle);
- 40.000bph RGB line for filling glass bottles in crates (25cl/50cl bottles);
- Suitable for still water and carbonated water;
- Bottles to be filled: 25cl, 50cl, 1Lt
- Bottle height: 181-290mm
- Bottle diameter: 58-89mm
Looking for a coating drum for food (coating dates with fine powder) Dates are sprayed with oil. These go to the powder drum and are coated with powder. Dry before packaging.
Vemag Process Check weigher
PI355 interleaver
Our company has scheduled the creation of a pilot plant in Algeria for alumina electrolysis to produce 20 tons of primary aluminum per day. Subsequently, we will make an extension to reach a capacity of 600 tons per day. We are looking for 4 new or used alumina electrolysis cells.
Technical specifications:
• Each cell should be capable of producing 4 tonnes of aluminum per day.
• Current intensity: 500,000 amperes per cell.
• Dimensions: Length: 16-18 meters; Width: 4 meters; Height: 1.5 meters.
The company which manufacturing these cells are as follows:
• Rusal (Russia)
• Rio Tinto (Canada)
• Sami-Chalco (China)
• Norsk Hydro (Norway)
Equipment to produce MCT-oil from coconut oil.
FOSS Tungsten Halogen replacement bulb for Infratec 1241 Grain Analyser; p/n of the bulb is 60023564