Número do item 1030756

Analisador Chandler Engineering 6100


Entre em contato

Moeda Aceitável de Vendedores:

$50,000.00 USD

Fazer uma oferta

Localização:  AB, Canadá

Nível de Remoção:  

Por que recomendamos visita aos equipamentos?

*Todas as ofertas são enviadas em moeda dos vendedores

Não encontrou o que você está procurando? Nós podemos encontrar para você





Descrição do equipamento
Chandler Engineering 6100 Formation Response Tester

Includes Two Quizix Pumps, Haskel CO2 Booster Pump and Quizix Q6000 CO2 pump

A Critical Tool for Reservoir Analysis
The Model 6100 Formation Response Tester (FRT) is designed to accurately measure the permeability changes of a formation sample when exposed to a variety of test fluids. This highly flexible, easy to use system is capable of simulating nearly any well completion and stimulation schedule on a core sample. The unit is also capable of operating as a dynamic fluid loss tester with the optional Slurry Cart.

Designed for Flexibility and Reliability
The unique design of the Model 6100 allows fluids to be injected through a prepared core sample to simulate the flow of treating fluids or formation fluids. Core flow can be directed through several paths: Injection and Production (forward, reverse), Top and Bottom flush (across-face) and Leak Off and Lift Off. Up to nine separate fluids can be controlled in any sequence through any flow path (6 directly connected to the pump and 3 accumulators). The system is designed to handle acids and other corrosive fluids at temperatures up to 350ºF / 177ºC. Reliability is designed into the Model 6100 to ensure many years of service. A custom valve manifold contains all necessary flow paths. This significantly reduces the number of fittings, the maze of tubing, the fluid dead volume, and most importantly the number of potential leaks. Durable, air-operated valves 316SS or C-276 wetted parts can be quickly and easily replaced if needed.

Operational Simplicity
The Model 6100 is designed to be very user friendly both mechanically and in its software interface. The core holder pivots to ease insertion of a core sample or inspection of the holder. Once the core is loaded into the core holder, a confining pressure is applied to the Hassler Sleeve to seal the core. The technician then programs or selects a flow schedule and a desired temperature before clicking on the “run” button to begin the test. Multiple pressure ports along the core allow monitoring the change in permeability as fluids invade deeper into the core as well as the determination of skin factors which may influence the testing results.

The software for the Model 6100 also performs the data acquisition. All channels are recorded with time and can either be outputted directly or exported in spreadsheet format. The recorded data includes the measured and calculated values selected by the user. Upon test completion, an automated cleaning cycle can be run to prepare the system for the next test.

Especificações:
Padrão
Métrico
Nome do fabricante
Chandler Engineering
 

Número de Série:
142
142

Modelo:
6100
6100

Tensão:
220 VOLTS
220 VOLTS

Frequência:
50/60 HERTZ
50/60 HERTZ

Fase:
1
1

Corrent:
30 AMPS
30 AMPS

Tipo:
CHEMISTRY
CHEMISTRY

Forma Recomendável da Embalagem:
PALLET CUSTOMIZADO
PALLET CUSTOMIZADO


Dimensões:
Padrão
Métrico

Total:
67 x 34 x 64 IN - 600 LBS
1701,80 x 863,60 x 1625,60 mm - 272,16 kg

Aviso Legal

Recomendamos que você entre em contato com a EquipNet para agendar uma visita ao equipamento (19) 3277-1125, [email protected].

AB

Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador.


Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador. Poderão haver requisitos específicos na execução dos serviços dentro da área do vendedor. Poderá ser obrigatória a realização dos serviços somente por empresas que já são homologadas pelo vendedor.