Número do item 916525

Autoclave Getinge GE 700X1450X1350-1


Moeda Aceitável de Vendedores:

€60,000.00 EUR

Fazer uma oferta

Localização:  Itália

Nível de Remoção:  

Por que recomendamos visita aos equipamentos?

*Todas as ofertas são enviadas em moeda dos vendedores

Não encontrou o que você está procurando? Nós podemos encontrar para você




Descrição do equipamento
The Getinge Autoclave is designed for the sterilization of porous or laboratory materials, which are capable of withstanding seam at high temperatures in excel of 100°C. The Autoclave is supplied with the following process cycles and test facilities: 1. Vacuum Cycle 2. Leak Test 3. WarmUp and ALRT combined Mechanical Enclosure Fascia Panels the sterilizer is a recessed installation with fascia panels to the loading side only. Material: Stainless steel 1.4301 (AISI 304). Front surface texture: Tetra polished Ra< 1,2 micrometer Thickness 1.0 mm. Loading area / Plantroom area Barrier There is no requirement for a barrier. Pressure Vessel Loading Height: 300 mm from floor to the chamber bottom. Chamber Internal Dimensions Useable width 700 mm Useable height 1450 mm Useable depth 1350 mm Construction: Cross section: Rectangular Material: AISI 316L acid proof stainless steel Design pressure: 3 bar (g) & full vacuum Design temperature: 143 °C Welds: Robotic or semi-automatic whenever possible Internal Chamber and Ports Finish internal surface ground and polished to a high lustre Internal Ra value 0.6 microns 1 Door Design: Fully automatic, horizontal sliding Opening and closing: Automatic button controlled Door operation: Pneumatic motor Door safety: Stops and reverses if obstructed. Door close isolation keyswitch to prevent door closing if access to chamber is required. Internal door surface: AISI 316L stainless steel Door pins: AISI 316 stainless steel Media (Utility) Requirements Please refer to the installation drawing for details of sizes & consumptions. Requirements: Steam Compressed Air Supply Potable Water Supply Cooled Water Supply Condense

Especificações:
Padrão
Métrico
Nome do fabricante
Getinge
 

Ano:
2008
2008

Marcado CE:
SIM
SIM

Modelo:
GE 700X1450X1350-1
GE 700X1450X1350-1

Fonte de Aquecimento ou Refrigeração:
Água Resfriada
Água Resfriada

Material de Construção:
STAINLESS STEEL
STAINLESS STEEL

Dimensões da Câmara:
Chamber Internal Dimensions Useable width 700 mm Useable height 1450 mm Useable depth 1350 mm in
Chamber Internal Dimensions Useable width 700 mm Useable height 1450 mm Useable depth 1350 mm MM

Tensão:
380 VOLTS
380 VOLTS

Frequência:
50 HERTZ
50 HERTZ

Fase:
3
3


Dimensões:
Padrão
Métrico

Total:
000 x 000 x 000 IN - 000 LBS
0,00 x 0,00 x 0,00 mm - 0,00 kg

Aviso Legal

Recomendamos que você entre em contato com a EquipNet para agendar uma visita ao equipamento (19) 3277-1125, vendas@equipnet.com.

Europe

Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador.


Quaisquer itens que não estão na descrição, mas aparecem nas representações visuais, não serão incluídos na venda. Remoção, desmontagem, embalagem, seguro e frete: custos de responsabilidade do comprador. Poderão haver requisitos específicos na execução dos serviços dentro da área do vendedor. Poderá ser obrigatória a realização dos serviços somente por empresas que já são homologadas pelo vendedor.

Pessoas que visualizaram este produto também viram: