Wanted Equipment - View equipment by type, industry, and location

Occasionally EquipNet has a customer that is looking for a very specific piece of equipment that we do not have listed on our extensive MarketPlace. When this happens we use all our resources to search high and low to meet our client’s needs.

Below is the list of current wanted equipment. If you have a piece on this list, please upload your equipment information using our Self Post Now platform or contact an EquipNet Sales Representative and we will post it for you. If you are searching for your own wanted equipment, contact us today!


Showing 1 - 50 of 177 listings


Show:
« Page 1 of 4 »
Filler

24 head multihead, multipond type of thing. Two rows of twelve heads stacked on each other. Ideal for packaging wet pasta, (tortelloni)

Category:
Fillers
Manufacturer:
Uncategorized
Aerosol Filling Line

Interested in any aerosol filling &/or packaging lines. No spec defined, general interest. Has a buyer looking.

Category:
Aerosol Filling Lines
Manufacturer:
Uncategorized
Tank

40 to 50 HL Hot Liquor Tank

Category:
Tanks
Manufacturer:
Uncategorized
Reactor

Volume primary tank : ±900ltr
Diameter : 1.200mm
Height Vessel : 400mm
Total height construction : 1.500mm

Operating temperature primary tank:
temperature upper limit 150?C
pressure upper limit 4barg
Jacket: steam heated upper limit 6,5barg
Heat transferring surface must achieve a warm-up rate of 30-45 minutes of heating the 900ltr process medium
from room temperature to medium setpoint temperature of 125?C.
Heat transferring surface must achieve a cooling rate of 30-45 minutes of cooling the 900ltr process medium
from the medium setpoint temperature of 125?C to 50?C.
Based on the experiences with the current reactor, it has been stated that the desirable mixing volume for the new reactor will be approximately 1.100 – 1.200ltr with a lower limit of 200-300ltr ? to be stirred with similar agitators as the existing reactor

Category:
Reactors
Manufacturer:
Uncategorized
Horizontal Cartoner

I'm looking to buy a cartoner that would insert 3 pouches into a carton. The carton size is around 7"X5"X4" LXDXH. Pouch size is around 5X3.5". Speed 35 cartons/min

Category:
Horizontal Cartoners
Manufacturer:
Uncategorized
Filler

semi auto or auto cannabis vape filling and capping equipment.

Category:
Fillers
Manufacturer:
Uncategorized
Stick Pack Filler

Looking for a Liquid Stick Pack Filler for a 10ml fill.
Need to print lot / exp. date on bottom of stick.

Category:
Fillers
Manufacturer:
Uncategorized
Extractor

Bench scale liquid carbon dioxide extractor.

Category:
Extractors
Manufacturer:
Uncategorized
Filter Pres

Stainless-steel food grade filter press with a filtration surface approx.. 10 cu. feet

Category:
Filter Presses
Manufacturer:
Uncategorized
Palletizer and Depalletizer

Can depalletizer that can fit in our current ceilings (about 18’ clear) and able to do about 1000 cpm range (ideally fully automated)

Category:
Palletizers and Depalletizers
Manufacturer:
Uncategorized
Screener

Customer looking for a high-frequency vibratory screen for fine-size particle separation in our pilot plant. Their focus is on conducting screening (seperation) as per below;
Seperation size on screen: 100 micron or -150 micron.
F80 to screen: 500-1200 micron
Sample Weights: 100-150 kg per test.
Type: Wet screening
Ore Type ( Feed Material ) : mainly Metal ores.

Category:
Screeners
Manufacturer:
Uncategorized
Tank

closed tank, no agit, no baffles, 50 psi jacket, wheels, 250-600 L

Category:
Tanks
Manufacturer:
Uncategorized
Chiller

500 Ton Glycol Chiller

Category:
Chillers
Manufacturer:
Uncategorized
Shaker

24” Sweco or Kason screener

Category:
Shakers
Manufacturer:
Uncategorized
Fermentation Unit

Looking for small fermenters range 20HL to 300HL for brewing beer.

Category:
Fermentation Units
Manufacturer:
Uncategorized
Blender

20-25 cu ft stainless steel ribbon blender

Category:
Blenders
Manufacturer:
Uncategorized
Mixing Vessel

lab pilot vessel for scale up batches. Should be jacketed for heating and cooling, must have homogeniser, agitator and scraper, and preferably a premix vessel attached. APEX rated stainless steel. 15-20kg/ L volume.

Category:
Mixing Vessels
Manufacturer:
Uncategorized
Gardner Mfg, Co. Grinder

The machine we're trying to replace is a Gardner 2H30 double disk grinder with (2) 25hp motors on each 30" abrasive wheel (see attached picture if that helps at all). It uses what is called a "gunfeed fixture" that oscillates in and out of the wheels as it grinds. I don't know if it'll give you a travel per head spec, but if so, we'll need at least .080" per head to run our parts complete.

Category:
Grinders
Manufacturer:
Gardner Mfg, Co.
Overwrapper

Paper overwrapper for chocolate gift boxes; box dimensions: 22.8 x 10.5 x 6.3 cm

Category:
Overwrappers
Manufacturer:
Uncategorized
Beverage Filling Line

Second-hand bottling equipment that can be used for brandy and spirits. It must be manufactured either in the UK or Germany. It should be washing the bottles, filling them and shut them (500 ml bottles)

Category:
Beverage Filling Lines
Manufacturer:
Uncategorized
Candy Wrapper

chocolate bar and pieces wrapping machines

Category:
Candy Wrappers
Manufacturer:
Uncategorized
Blender

stainless ribbon blender in the range of 150-180 cu ft.

Category:
Blenders
Manufacturer:
Uncategorized
Scale

combination scale for a 9-10 gram fill

Category:
Scales
Manufacturer:
Uncategorized
Tank

300litre capacity with a conical bottom.
Personal/Homecare products premix plant.

Category:
Tanks
Manufacturer:
Uncategorized
Sidel Beverage Filling Line

SIDEL canning line, volumetric filling, speed 30,000 can/h, hygienic filling and if possible 3 SKU’s 25, 33 and 50 cl

Category:
Beverage Filling Lines
Manufacturer:
Sidel