Listing# 988949

Unused 2023 ADCO 14WAE-90-WD Wraparound Sleever


Seller's Acceptable Currency:

Best offer


There is an accepted offer on this item already


Make Backup Offer


NOTICE: There is an accepted offer on this item. If you want more information or wish to submit a backup offer, please Click Here



Location:  TX, USA

Level of Removal:  Uncrated/Loose

Why we recommend inspection

*All offers are submitted in Seller’s Acceptable Currency

Don't see what you're looking for? We'll find it for you

Click here to view the sales agreement.




Equipment Description
Unused 2023 ADCO 14WAE-90-WD Wraparound Sleever

  • The 14WAE-90-WD wraparound sleever is a continuous motion machine designed to accept trays narrow edge leading from the upstream tray sealer.
  • Servo powered timing screws automatically space the trays and transfer them onto the lugged product conveyor.
  • When the main machine detects the product, the 2-head rotary sleeve feeder vacuum is activated, which
    picks a sleeve from the 48” long horizontal sleeve magazine and places it on top of the tray.
  • The tray and sleeve are transported to the overhead conveyor for flap folding, sealing and compression.
  • The completed package is discharged from the main machine by a powered discharge conveyor.
  • Pack Pattern: Single tray. Sleeve centered on tray.
  • Carton Size: 4.875 x 7.0625 x 1.75”
  • All Allen Bradley Parts
  • Section 3 – Order Summary

    1. Frame:

  • 9' long bolt together stainless-steel frame
  • Castors for portability and leveling feet

    2. Drive:

  • Continuous motion variable frequency drive (VFD)
  • Main drive overload protection

    3. Infeed:

  • Inline product transfer
  • Special 90° curved product infeed conveyor with VFD drive
  • Speed Control: Integrate WAE speed with customers tray sealer. Includes product back pressure and upstream backup detect sensors. A paid service call (to be quoted separately) will be required to tune the WAE speed with the tray sealer cycle rate to minimize frequent stops and starts due to the short distance between the two machines. However, due to the space constraints ADCO cannot guarantee that this will not be an issue!
  • Dual servo driven timing screws

    4. Magazine:

  • 48” long horizontal powered carton magazine with change out pick gate

    5. Feeder:

  • 2-head rotary carton feeder
  • Vacuum generator (Requires 95psi @ 9 cfm)

    6. Carton Handling:

  • Static side guides and compression - adjustable
  • Captured #40 overhead chains
  • 14” lug centers on main product and transfer chains
  • 17” lug centers on overhead and squaring chains
  • Bottom discharge belts, machine driven

    7. Carton Closing:

  • Nordson ProBlue Flex MOD 7 glue system with melt on demand tankless design and remote reservoir, (1) gun & hose, Saturn filters, mounting brackets, electricals, closing plow assembly, and bottom squaring chain
  • Nordson Eco-bead glue pattern generator to reduce glue consumption, requires MiniBlue II gun. Eco-bead/s to be housed in a Nema 4X SS junction box The Nordson Eco-Bead generator will be located in the main electrical enclosure. Per OCN C dated 10/5/22. No Charge.
  • Separate electrical disconnect for Nordson glue unit (Nordson unit will not lose power if the electrical panel is locked out)
  • Sleeve to Tray Bond: Add a 2nd Nordson ProBlue Flex T10 glue system with melt on demand tankless design and remote reservoir. The fugitive glue Nordson unit will be a local fill system and not a remote reservoir style. Per OCN C dated 10/5/22. No Charge. The fugitive glue Nordson unit will be a T10 local fill system with a 10KG capacity. Per OCN D dated 1/30/23. No Charge. With one MiniBlue II gun to apply a short bead of fugitive style glue to the top of the tray (offset to a side flange) before the flat sleeve is placed.
  • This is the most consistent and reliable solution to help secure the sleeve to the tray (other than shrink wrap)

    8. Electrical & Controls:

  • 460V/3ph/60hz electrics with 24vdc control voltage
  • Jog cord with pushbutton and watertight outlet
  • Alarm buzzer for start/stop of machine with (3) second start delay
  • Programmer port mounted on electrical enclosure
  • 4-color stack light with Green for machine Running, Yellow for machine waiting for product, armed and ready to run, Red for machine Stopped (safe) and Blue for low carton hopper supply
  • UL 508A Type 1 Listed Industrial Control Panel
  • PLC: A-B CompactLogix 5380 control system (software note included)
  • HMI: A-B PanelView +7 1000 10” touchscreen with start, stop, reset and e-stop push buttons.

    Includes fault map on touchscreen and PackML programming

  • StrongArm overhead beam operator HMI mount
  • Remote operator control station with start/stop/rest/e-stop push buttons

    9. Safety:

  • Lexan barrier guarding - electrically interlocked
  • Category 3 electrical safety system

    10. General Construction:

  • Right hand operator side
  • Carton bottom to floor elevation 34”±1” (.86m)
  • Scales on all adjustments
  • Metric construction consisting of all bearings, shafts, and fasteners
  • High strength, corrosion resistant coated chains
  • Group lubrication, accessible with doors closed
  • Long outside glue panel oriented to the Right (looking downstream)
  • Washdown construction to include:
  • Water resistant Nordson glue gun and hose
  • NEMA 4x electricals
  • Hard anodized aluminum
  • Stainless steel sprockets and fasteners
  • Stainless steel bearings with thermoplastic housings

    Note: Includes spare parts.

  • Specifications:
    Standard
    Metric
    Manufacturer Name
    ADCO Manufacturing
     

    Year:
    2023
    2023

    Model:
    14WAE-90-WD
    14WAE-90-WD

    Serial Number:
    6338HG
    6338HG

    Air Requirements:
    34.4 CU FT/MIN
    34.4 CU FT/MIN

    Voltage:
    460 VOLTS
    460 VOLTS

    Frequency:
    60 HERTZ
    60 HERTZ

    Phase:
    3
    3

    Current:
    31.9 AMPS
    31.9 AMPS

    Recommended Packaging Form:
    CUSTOM PALLET
    CUSTOM PALLET


    Dimensions:
    Standard
    Metric

    Overall:
    9.84 x 3.28 x 6.56 ft - 6613.80 lb
    3 x 1 x 2 M - 3000 KGS

    Disclaimer

    This lot is being sold "as is, where is". We recommend that you contact an EquipNet sales representative to set up your own inspection. This item is located in

    TX

    This equipment is subject to a removal and loading charge.

    Please Note The seller of this equipment requires the buyer to accept a sales agreement. Click here to view the sales agreement.


    The written description provided for this equipment is EXACTLY what you will receive if you opt to purchase this listing. Any items that are not in the description but appear in the visual representations of this listing will not be included in the sale. Photos and video are provided just as references and to give a general sense of condition.

    Please be aware that weights and dimensions of equipment provided on EquipNet’s listings are estimates and can vary from actual weights and size. Sellers estimates are often not precise especially when equipment was installed versus prepped for shipment. As such, please do not fully rely on the accuracy of this information in EquipNet’s listings for shipping quotes and/or user size requirements.

    Any license associated with this equipment is non-transferable.

    Customers who viewed this item also viewed this